Concerned about surprises Label: the difference between up-cut and down-cut Previous: New energy is in the limelight, requiring machine tool equipment specifications, Next: Is qualified building materials harmless? Home environmental protection and careful misunderstanding Hook Strip Flat Screens Hook Strip Flat Screen,Hookstrip Slat Screen,Oilfield Hook Strip Flat Screen,Solids Control Hook Strip Flat Screen Anping Shengjia Hardware Mesh Co.,LTD , https://www.oilshaleshakerscreen.com
Hook strip flat screens the series applied most widely at present, Main feature as follows:
1.These products screen panel are constructed with two or three 304 or 316 stainless steel wire cloth layers with a steel backing plate combined together. Because of different mesh size, and steel backing plate, on the condition of using intensity, to get the best and most effective filtering area.
2.The above of thin wire cloth with middle and the bottom of the thick wire cloth, combined with different thickness steel backing plate together, infinitely enhance the whole screen use intensity. Because of different model and clients requirement, can choose different steel backing plate form, for example hexagonal, rectangular, square and so on, supporting the above different screen cloth, the whole cloth is divided into independent small surfaces, prevent the part excessive expansion damaged, better extend the use lifetime.
The difference between up-cut and down-milling
What is down milling? What is up milling? What are the characteristics of the down-cut and up-cut milling of CNC machine tools? Climb milling: the horizontal component force Fx of the cutting force F is the same as the f of the feed direction. The milling direction F: The horizontal component force Fx is opposite to the feeding direction f. The milling feature 1 is prone to turbulence and needs Adding the milling mechanism. (Because of the gap between the screw and the mother) 2 The surface quality is higher than that of the reverse milling. (Applicable to finishing) Up-cut milling Features 1 High working stability, no need for up-cutting mechanism.