The shower room is installed in every home, but do you know the process of installing the shower room ? What are the precautions for shower room installation? If you don't understand, don't worry, the decoration home decoration network Xiaobian to help you!
Ultra Plantâ„¢ Grow Light offers One Chip Technology aimed to meet your indoor growing expectation such as improve plants' quality, increase yield, or better the margin, etc., all for helping you realize a higher return on your crops.
From Ultra Plantâ„¢ APP, you are able to schedule the growing process including photoperiod, brightness and spectral in advance. The lighting system will help you grow smarter, easier and better.
730Nm Led Grow Light,730Nm Led Grow Lights,Best 730Nm Led Grow Light,730Nm Led Grow Light For Sale Feton Corporation , https://www.fetongrowlight.com
1. Prepare the necessary decoration tools.
2, the installation of the bottom basin: combine the bottom pot parts, adjust the level of the bottom basin, to ensure that there is no water in the basin, the bottom of the basin. The hose can be telescoped with distance, and the bottom of the basin is firmly connected to the floor drain.
3. Test and protection: After installation, water test should be carried out to ensure unimpeded flow. Fourth, find a position, punch: use a pencil, level to determine the drilling position of the wall aluminum, punch with a hammer drill.
4. Install aluminum: Knock on the rubber in the hole and lock the aluminum bar to the wall with screws.
5, fixed glass: the glass is clamped and locked in the bottom hole of the bottom basin, and then fixed with screws.
6, install the top tube: find the corresponding position above the fixed glass drilling, install (straight / oblique) fixed seat and connect the top tube. Secure it to the top of the glass with a bent sleeve.
7. Installation rack: Align the position of the mounting frame, tighten the plate nut, and fix the laminated glass to maintain vertical and horizontal. Be careful to waterproof under the fixed glass of aluminum.
8. Install the movable door: Install the hardware of the movable door and install the hinge on the reserved hole of the fixed door. After installation, adjust the position of the shaft of the lotus leaf until the door feels the best.
9, waterproof: install the suction strip or water retaining strip on the side or below the glass as required. Use aluminum mesh to seal the seam between the aluminum and the wall, glass and bottom basin.
10, commissioning, fastening: check whether all parts are comfortable and smooth, and find problems should be adjusted in time. After adjusting, tighten the corresponding screws to make the whole shower room firmer.
11, finishing work: the decorative aluminum strips stuck into the wall aluminum, to ensure that its appearance is clean and generous. Finally, wipe the entire shower room with a rag.
1. The pre-buried hole size of the shower room should be designed before the bathroom is renovated.
2. The best custom shower room with water supply system and tile installed.
3, wiring leakage protection switch device, etc. should be considered before the installation of the shower room, so as not to rework.
4, the style of the shower room depends on the layout of the bathroom, common corner type and one-line type.
5. When installing the shower room, it should be installed in strict accordance with the assembly process.
6. The shower room must be firmly connected to the building structure and cannot be shaken.
7. Open-type shower room must use expansion bolts. After fixing and draining with non-hollow walls, the amount of water in the bottom basin is not more than 500 grams.
8. The appearance of the shower room should be neat and bright after installation. The sliding door and the sliding door are parallel or perpendicular to each other. The left and right symmetry and sliding door should be opened and closed smoothly, without gaps and water seepage. The shower room and the bottom basin are sealed with silicone.
The above is the decoration of the renovation of the home decoration network for everyone to introduce the relevant knowledge of the shower room installation , I hope to bring help for your decoration! More exciting content, please pay attention to the decoration encyclopedia section!
Ultra Plantâ„¢ Grow Light is combined our advanced All-In-One technology with patented optical design and customized light full spectrum supported from our experienced LED engineers, plant specialists and other partners working on horticulture.
Ultra Plantâ„¢ is the most versatile horticultural grow lighting fixture for indoor plants with flexible full spectrum, brightness control and uniform, wider light distribution, suitable for top lighting of all types of crops. No matter it applies to anywhere for any crop, Ultra Plantâ„¢ can do perfect work for you.
Shower room installation process shower room installation precautions