The advantages of VGA optical transceiver

VGA optical transceiver adopts pure digital transmission mode, which can fundamentally overcome the phenomenon of smearing and ghosting caused by ordinary copper core cable transmission system when transmitting high-frequency band signals and clearly reproduce the picture images. The VGA optical transceiver transmits optical signals without electromagnetic radiation. The system has extremely high security. At the same time, the VGA optical transceiver completely isolates the display device from the signal source, and has extremely high anti-interference ability.

The advantages of the VGA signal optical fiber transmission system Compared with the traditional analog signal cable transmission method, the VGA signal optical fiber transmission system has obvious advantages in the following aspects.

the first. VGA signal transmission over long distances. Due to the use of digital optical fiber transmission, signal blurring and smearing caused by long-distance transmission of analog signals in cables are completely eliminated. The signal transmission basically achieves no loss and the picture is clearly reproduced.

second. The transmitter and receiver are electrically disconnected and fully electrically isolated, thus eliminating ground interference completely.

third. Optical signal is easy to shield, no electromagnetic radiation, and good confidentiality.

Technical parameters :

DVI input/output interface: VGA type optical input, output interface: single/multimode SC type mains input interface: AC100~240V, 50/60HZ

Dimensions (mm): 150 (L) × 180 (W) × 44 (H)

Audio port: Audio, MIC type Weight: 420g

Video signal bandwidth: 1.65Gbps

Equipment power input: DC5V/3A

Input light center wavelength 130nm

Transmission power -9.5~-3dBm average optical power @130nm

Optical Receiver Sensitivity -23dBm Average Optical Power @ 130nm

Transmission code rate 240MHz ~ 1.65GHz

Transmission distance 1m~2000m/multimode fiber 1m~20km/single mode fiber Operating temperature: -25°C~+70°C

Tool Belts

Tool belt is a piece of equipment used to hold and organize tools for easy access during work. Tool belts are commonly used by construction workers, carpenters, electricians, and other tradespeople who need quick access to their tools while working.

A typical tool belt consists of a belt made of leather or nylon with pockets or pouches attached to it. The pockets or pouches are designed to hold different types of tools, such as hammers, screwdrivers, pliers, and measuring tapes.

There are different types of tool belts available, including leather tool belts, nylon tool belts, and electrician tool belts. Some tool belts also have suspenders or shoulder straps to help distribute the weight of the tools more evenly and reduce strain on the back.

When choosing a tool belt, it is important to consider the type of work you will be doing and the types of tools you will need to carry. You should also consider the size and fit of the tool belt to ensure it is comfortable and does not interfere with your movements while working.

On The Go Tool Pouch

Tool Belts,Electrician Tool Pouch,Tool Pouch,Small Tool Bag

ZHANGJIAGANG CITY XIANGLE TOOL CO., LTD. , https://www.sjxiangletoolbag.com