Ground sockets , as the name suggests, are sockets that are installed on the ground. Mainly used in office spaces, airports, hotels, shopping malls and other large open indoors. The ground plug is no longer restricted by the wall like the switch socket, and the socket avoids the exposed wire of the terminal block due to the long-term plug-in row, thereby being more beautiful and safer. Then, how to install the ground socket? The decoration home decoration network Xiaobian will give you a brief introduction to the installation of the ground socket ! Optical Diffraction Gratings,Optical Grating,Diffraction Grating,Manufacturing Of Ruled Gratings China Star Optics Technology Co.,Ltd. , https://www.csoptlens.com
Check carefully before installation to ensure the quality of the socket. If you are not familiar with the socket, you should first determine the live, neutral, ground and tie wires of the socket.
1. Observe whether the installation position of the socket is correct and whether there is any debris in the box;
2. Check if the insulation of the wire entering the appliance is good;
3. Check the metal line protection tube for cracks.
The ground socket mainly consists of two parts, a bottom box and an upper cover. The installation of the ground plug can be carried out in two steps.
1. The installation of the bottom box
First, determine the installation location. The ground insertion installation is best to choose a relatively dry space location, the bottom box and the metal conduit are reliably connected, and the concrete is poured to fix the bottom box. Second, determine the pre-buried depth. In general, in order to ensure that the upper cover can perfectly fit the ground, the upper end of the bottom box should be 3-5mm below the ground level, so as not to be too prominent to pose a potential danger, and it is not easy to use.
2. Installation of the upper cover
After the concrete is fixed, remove the bottom box cover, clean the dust and debris in the box, and clean the gaps. Secondly, apply anti-corrosion paint around the hole and the concrete material around the hole must be completely dry before installation. Because the ground plug is installed on the ground, it is directly in contact with the tile on the ground. If the anti-corrosion treatment is not carried out, the concrete material that has not been completely dried contacts the metal, and the efflorescence phenomenon occurs, and the cover is corroded. After the anti-corrosion treatment, connect the grounding connection between the bottom box and the upper cover. Finally, fix the top cover.
The above is the introduction of the relevant knowledge of the ground socket installation brought to you by Xiaobian. After installation, it should be noted that the ground socket should be in good contact with the smooth ground to prevent water leakage and cause electric shock; in the kitchen, etc., whoever and where there are, should Put a protective box on the ground to prevent moisture and fumes. Want to know more about the relevant knowledge, please enter the home decoration encyclopedia of the decoration home decoration network!
How to install the ground socket?