Core Tip: High-pressure fans are important components that are widely used in various mechanical equipment. Simple maintenance of the vortex air pump can improve work efficiency and is necessary to ensure the normal operation of the entire production. So how do you perform simple maintenance? 1. Maintenance when the pressure or flow of the pump is reduced When there is pressure and flow drop, first cut off the power supply of the windshield vortex pump, check if there is something blocked in the air inlet, check the air inlet filter, but do not remove the filter, otherwise it will suck the air intake pump, causing damage. . Secondly, if there is any debris inside the machine, the rubber skin will withstand the electromagnet, and the electromagnet will not recover. At this point, the outer casing of the vortex air pump can be opened to clean the internal debris. Drill a small hole in the rubber skin to eliminate the adsorption caused by the negative pressure. The lack of phase or running direction of the motor is also a cause of such faults. In this case, check and reconnect the power supply. If the motor burns out, replace the same type of motor. Check whether the capacitor is intact and the wiring is correct. 2. Maintenance when the air pump noise becomes large First check if there is any debris in the windshield vortex pump. If there is, open the casing and clean the internal debris. Secondly, check if the impeller is stuck. At this time, it is best to contact the manufacturer for repair and reassemble to eliminate the fault. Third check if the bearing is damaged and replace the bearing if necessary. 3. Maintenance when the pump temperature rises First check if the air inlet is blocked and clean the air inlet filter, but it can't be removed, otherwise it will suck in the debris and damage the mechanical equipment. Please properly maintain the working gap of the air pump. Next, check the body for debris, open the casing, and clean the internal debris. Concerned about surprises Label: How to maintain high pressure fan Previous: Sexual UV coating development takes into account double standards Next: How to check wire and cable? Galvanized Barbed Wire,Galvanized Barbed,Zinc Coated Steel Barbed Wire,Galvanized Wire Coatings Shenzhou City Hongda Hardware Products Co.,Ltd , https://www.galvanziedwire.com
How to maintain high pressure fans