Fluorescent lamp mounted with ceiling embedded, suspended and directly mounted 1. The luminaire should be installed indoors and outdoors with good ventilation, less dust, no corrosive gas and combustible and explosive materials. The supply voltage is allowed to fluctuate within the range of +20% to -20% of the rated voltage. Out of range will affect the lighting specifications. Excessive voltage may burn the electronic ballast. 2. Different types of electrodeless fluorescent bulbs can only be used with their matching power electronic ballasts. 3. The cable connecting the bulbs should not be lengthened at will. 4. For the colder winter areas such as the north or places used outdoors, the lamps used should be of high sealing level. It is strictly forbidden to disassemble the used lamp covers. 5. The actual system power deviation of the supporting lamps is within the allowable range within ±10%. 6. When installing fluorescent lamps, you should first read the instructions for the lamps and understand the installation and fixing methods of the lamps, so that the corresponding installation measures can be done in advance. 7. Before installing the luminaire, it is best to connect the luminaire first and then power on to confirm that the luminaire will be on and then install the luminaire. In order to prevent the trouble caused by the transportation or other reasons after the installation, the lamp will not be bright. 8. The width of the upper and lower sides of the steel ring used for the high-hanging lamps (GC series) lampshade is different. 9. When installing, the wide side should be fastened to the side of the light mask, and the narrow side should be used to hold the lamp cover.
1. According to request it can do a single-stage and
continuous cutting.
2.
Operation of
this machine is simple, reduced operational requirements of workers.
3.
Machine with
high degree automation, can achieve a continuous, intermittent feeding,
effectively improve work efficiency;
4.
Simple
operation, flexible adjustment and stable operation.
5.
Multi
-purpose machine, can complete continuous feed and cutting length.
Angle Iron Root Cleaning Machine,Angle Bar Root Cleaning Machine,Angle Steel Machine,Heel Milling Machine for Angle Tower Shandong EN FIN CNC Machinery Co., Ltd , https://www.shuofangcn.com
Precautions for installing fluorescent lamps