DDB series multi-point dry oil pump precautions

DDB series multi-point dry oil pump is mainly used in lubrication of low frequency, lubrication point not exceeding 50 points, the nominal pressure of 10MPa multi-line dry oil lubrication system. That when using DDB series multi-point dry pump should pay attention to what matters? DDB series multi-dry pump Notes 1, multi-point dry pump should be installed at the appropriate ambient temperature, less dust, easy to grease, adjust, check, maintain Maintenance and other convenient occasions. 2, DDB series of multi-point dry pump before the first gearbox to add HL-20 gear oil to the oil standard provisions of the liquid level. 3, to the dry oil pump filler grease must use SJB-D60 manual pump or DJB-200 electric pump from the fuel filler port to join, be careful not to start the motor oil in the oil reservoir Run. 4, according to the direction of the storage drum whirlpool steering motor wiring, shall not be reversed. 5, the accuracy of the filler neck filter is not less than 0.2mm, should be cleaned regularly. 6, dry oil pump should always be kept clean, non-exposed cover grease to prevent dirt from entering the pump body, affecting normal work. Further reading: China Construction Water Expo Guangzhou Ring Industry Leaders Industry Link (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Daohui (QQ / WeChat:) http://beng.liuti.cn/ (Service Hotline: 400 -6030-811)

Plastic Wood Steel Paint Stirring Stick

Plastic Wood Steel Paint Stirring Stick,Painting Mixing And Stirring Stick,paint stirrer

PRO-CHARGER CO., LTD. (VICTOR HERO HOLDINGS LTD, TIME VALUE LTD.) , https://www.pro-chargerco.com