Bearing maintenance

TIMKEN bearing authorized dealer First, the method of bearing maintenance with stained oil Dirty SKF bearing authorized agent distributor A method of bearing maintenance with stained oil to wash dirt, and then lubricated oil maintenance, if you do not use lubricant bearings Size inquiries Bearing model comparison table A, bearing maintenance method Use stain oil to wash off the dirt, and then use lubricants, if you do not use oil, in the past stained oil after soaking faster rust.
Can remove the cover of one side of the bearing, use the method of bearing maintenance, use the stained oil to wash out the dirt, and then use the lubricant to maintain, if you do not use lubricating oil, after soaking in the past oil will be more Fast rust.
Can remove the cover of one side of the bearing and wash it with oil (gas station has sold 15 yuan/bottle). After washing, oil can be applied to the needle.
If the oil is too sticky, add a little WD-4 imported SKF bearing agent turntable bearing 0 is not bad.
However, skating on a rainy day is a taboo, and the bearing will rust and be destroyed.
Bearings must be immediately oiled and maintained.
Second, equipment lubricants (lubricant): protect the bearing; clear Palin inside the dirt, foreign matter.
Cleaner: Cleans, removes grease (degreaser)
If the bearing turns bad and there is noise, it may be the bearing into the sand.
If you are not very particular or lazy, you can actually avoid it. Moreover, once the bearing is dismantled and the thicker butter is washed out, it will become easier to get into the sand than before, and it will be washed more frequently afterwards.
Third, equipment:
Go to oil two cans (to the gas station to buy, 15 yuan per can)
Bowls or other containers (do not use plastic, may dissolve)
Several small containers (to put down the little things removed)
Precise screwdriver (the kind of small screwdriver that locks the eyeglasses of the locker)
Toothbrush Lubricant (WD-40, Needle Car Oil, Dinosaur 191 Use One, and Dinosaur 192 Spray Butter or Butter)
Fourth, steps:
1, first remove the wheel, remember to close the screws, lost on the trouble!
2, remove the bearing. Some cores of the wheels are tight, and it is difficult to remove the bearings. Use a hex wrench (the one that removes the screws) to forcefully dig it down. Rest assured that the bearings are not easily broken!
3, first use the toothbrush to brush the dirty surface of Palin, you do not do this step, no difference!
4. Some side covers of the bearings are detachable, while others are not. First, determine if Palin is detachable.
How can I tell you? Don't worry! If there is a C-shaped ring at the edge of the bearing side cover, it is detachable. If it is not, it cannot be removed, but there are exceptions!
5, if it is detachable, it is very simple! With a precision screwdriver, in the gap of the C ring, pick up the C ring and remove the side cover. Just remove the side and you're done! C ring and side cover must be closed, wait for you to wash them "likely" want to put them back!
6, if it is detachable, it is more trouble! Use a destructive approach. Use a precision screwdriver to reach into the seam of the side cover, and force the side cover to pick it up. Don't doubt it. That's it, but this side cover will not fit back! Well, lose it! Remember, as long as the side is demolition, it will be destroyed on both sides!
7. Remove all the side covers of all bearings and start washing! Drain the oil into the bowl and drop the bearing to stir it.

Kunshan Keno Precision Bearings Co., Ltd. currently has the following model company stocks, there is a need to contact us: 23028EW33K bearing bearing NU214ECML TIMKEN bearing 560-S/552-S LASE20-N bearing bearing 6007-Z SKF bearing 7210BECBP IRT3020 bearing bearing SNL532TURU NTN 6220-2RS SKF629-2RSH bearing TLAM5025 FAG 292/850E.MB NSK32364 bearing 7336DB FAG EGF35260-E40-B FAG1208TV bearing NJ228E bearing NACHI3981/3920 KLL481448-LL481411 bearing NTN6205Z 7022 bearing KOYO23068RK+H3068 NKI90/26 bearing NACHINUP306E 24034B bearing 22232RHAK+AH3132 EGB1420-E40 bearing 54408 GBRI122416 bearing 7019C/DB NN3020KTN9/SP bearing H220X SKF bearing 1301E HS71920-ET-P4S bearing 7334AC/DT SKF bearing 51220 NU1076 bearing B71905-CT-P4S FAG bearing B71924C.O 32024X/DF bearing 71924ACD/HCP4A RNA6904 Bearing 2279 NUTR50110A Bearing 7214CDF NJ203-E-TVP2 Bearing B7024-ET-P4S 22334CCJA/W33VA406 Bearing