40W Glue Guns Features:
1. Versatile
2. Easy
3. Quick
4. Proective Nozzle Cover
5. Trigger Flow Control
6. Bonds instantly
7. High quality
8. High temperature or low temperature
9. New design
10. With switch function
11. Big power
12. Industrial use
Idea for many applications. Fastening various materials such as paper, cardboard, fabric,wood, lace,trims,leather,metal,glass, tiles, rubber, ceramics and flooring etc.Ideal for hobby and household repair,DIY&craft projects.
Designed and manufactured to the highest of standards to ensure a robust and long life, we hope it provides you with many years of trouble-free, safe and reliable service.
General Safety Information:
1. Check if the plug cord was in good condition, and if there is stand before plug into the electrical outlet ; Check if the used glue gun has glue flow through back of the tunnel;
2. wait 5-10 minutes to allow glue to soften, stand up the glue gun on the table when not in use;
3. Touch nozzle to any clean, dry surface you wish to bond, to avoid any impurity stop the nozzle;
4. If the glue could not flow from the nozzle when the glue gun start to work, check if the glue gun are heating;
If glue gun can not be heated, there are following reasons:
If glue gun can be heated, there are following reasons: Nozzle has been stopped by any impurity, ask careerman to manage it.
5. Do not use the glue gun under moist climate, humidity will affect insulation and cause electric shock;
6. Do not touch the nozzle or melted glue;
7. Do not remove out the melted glue stick from the tunnel back side, it will damaged the glue gun as well as scalding person hands.
8. Do not to disassemble or assemble any glue gun accessories freely, it will cause glue gun do not work properly;
9. Keep out of reach of children and stocked it beyond any of Children palpable side;
10. Only used for melting glue stick, no other usage;
11. When in use, there are any glue flow back from tunnel, stop using immediately, wait for careerman clean the glue;
12. Close the power if the glue gun not in use after 15 minutes;
Using methods
1. Glue gun using voltage is 110-220V AC,50/60Hz;
2. Tip gun forward on stand and place a piece of cardboard under the nozzle
3. Use 7-8mm (mini trigger glue gun), 11-12(big trigger glue gun), insert glue sticks through
4. After power, wait for 5-10 minutes to allow glue to soften
Professional Glue Gun, 40W Glue Guns, Silicone Glue Gun, Hot Melt Glue Gun Ningbo Kingvos Electrical Appliance Co.,Ltd , http://www.kingvos.com
1 Plug cord into electrical outlet not properly;
2 Glue gun has been destroyed owing to inner cord short circuit;
tunnel at back of gun
What are the advantages of the rope for fire protection?
[ Huaqiang Security Network News ]
In the home or other public places, if there is a fire or other accident, the person is trapped by the fire and cannot escape. You can use the emergency escape rope to escape in time. Of course, sometimes you can choose to escape with a wet sheet rope, but this is limited to the lower layer and the fire is not strong, and may break or burn due to too high temperature of the fire. At present, with more and more high-rise buildings in China, it is more and more important to equip professional escape ropes. When there is a fire in the home or elsewhere, the personnel are trapped by the fire, and the escape route is not available, the emergency escape rope can be used for emergency evacuation. It can be transferred to a safe zone according to the actual situation.
advantage
1. This product has 8 meters, 10 meters and 20 meters (also available according to customer requirements)
2, this product has high efficiency flame retardant effect, do not have to worry about accidents such as being blown;
3. If you think that the professional flame-retardant escape rope is not the ideal choice, you can also purchase the escape rope containing the steel wire;
4. This product is easy to operate and easy to use;
5, because this product is highly resistant to wear and high temperature, it can also be used in other aspects.
3, technical parameters
The rope is made of flame-retardant and wear-resistant material, with a diameter of 8mm and a length of 8m, 10m and 20m. This product comes with a safety hook. Load-bearing tensile force of 1500KG or more, high temperature resistance.
4, use recommendations
How to use: 1 Fix one end of the lifeline on a firm object and throw the lifeline down the window downstairs. 2 Hold the lifeline with both hands, hook the window sill on the left foot, and slap the outside wall on the right foot. After the person is stable, move the left foot out of the window. 3 The two legs are slightly curved, and the two legs are forced to rub against the wall. The arms are straight and the hands are slightly loose. The eyes are gazing down and sliding down the lifeline. 4 When approaching the ground, the right arm is bent forward, the legs are slightly curved, and the two toes are first grounded.
Precautions for use and storage of life-saving ropes: 1 The ropes should not be subjected to overload shocks or loads during use. Otherwise, strand breaks or even broken ropes may occur. 2 should be stored in a dry and ventilated place to prevent mildew. 3 Wash after use. After warm water, it should be placed in a dry and ventilated place in the shade or dried, and avoid exposure for a long time. 1 diligent inspection, if the rope is found to be worn out more or more than 1/2 strands are worn out, it should be stopped immediately. 5 Users should regularly carry out weight-bearing inspections, such as no broken strands or damage, before they can continue to use. 3 When the lifeline is in storage, avoid touching the rope with sharp objects. If it is contaminated with acid or alkali, rinse it immediately and dry it.