How many meters behind the car should the triangle warning sign be placed? The result of the answer is that it is varied: it is said to be placed 3-5 meters behind the vehicle; it is said to be 200 meters away from the vehicle;
How many meters behind the car should the triangle warning sign be placed? The result of the answer is a variety of things: it is said to be placed 3-5 meters behind the vehicle; it is said to be 200 meters away from the vehicle; it is also said that the warning sign should be placed 500 meters away from the car. It seems that this is a blind spot for vehicle knowledge. Well, today we will talk about how to use the warning triangle. 1. How many meters should I put behind the car? During the day in the general city loop, the warning sign should be placed 50 meters behind the car. If it is a highway, it should be placed 150 meters behind the car (about 200 steps for adults); if it is in the dark, When the city loop encounters a vehicle failure, it is necessary to set the warning sign at a position 100 meters behind the car, and on the highway to be set at a position of 250 meters (about 300 steps for adults).  Triangle warning sign correctly placed distance  When you use the triangle card to recover, you should put the triangle back to the car to avoid accidents.   When setting up the warning triangle, you need to hold the warning sign with both hands, and the reflection is facing outwards. You are going in the direction of the car. This is especially the case when the car lights up to the triangle on the night and the car is reflected earlier. Of course, you must turn on the double flashing warning light in the car after the accident! 2. Where is the road placed? Please be sure to put it in the correct distance in the corresponding lane where your vehicle is located. The role of the triangular warning sign is to remind the rear car to notice a traffic accident in front of this lane. Please detour in advance. Don't do anything that happens when the car is out of the way, but you put the warning sign on the outermost or innermost lane.  If your car is unable to move on a slope, please be sure to put the warning sign on the top of the slope or the slope, so that you can notice the car early, because the vehicle will cause blind spots on the slope. If you put the warning sign on the ramp, it is the function that loses the attention of the car in advance. Therefore, remember that the slope warning should be placed on the bottom of the slope or the top of the slope.   Special attention should be paid to accidents on curved roads. Be sure to place the warning triangle on the road before you enter the corner. Because the driver of the vehicle does not pass the "convex mirror" established by the roadside after the detour, the front bend cannot be seen. In the case of the road, it is necessary to place the warning sign on the road front before the bend, to inform the vehicle to slow down and avoid the "secondary accident" caused by the inability of the rear car to be promptly prompted. Http:// For more information, please pay attention: autohao128  |
KS Standard Glass Beads,Appearance: colorless transparent sphere, round and smooth, no obvious bubbles or impurities.1,micro glass beads for road marking paint as reflective material; 2, glass beads for road marking paint; 3 glass beads for traffic. 4; round rate of ≥ 80%; Density :2.4-2 .6g/cm3; refractive index: Nd ≥ 1.50 .
REFLECTIVE GLASS BEADS – drop on / premix beads
For the visibility of road markings reflective glass beads are a major component. Together with the marking material the reflective glass beads constitute the retroreflecting system. The micro glass beads embedded in the marking material reflect the headlight of the car, hence the marking lights up at night. This [lighting up" – retroreflection – makes the road marking better visible for the driver and is thus an important and crucial factor for road safety.
Reflective glass beads as drop on or premix beads:
increase road safety through better visibility at night as well as in particularly bad weather conditions, like fog or rain. improve the life span and the durability of the road marking due to their hardness are a particularly economical factor for traffic guidance and road safety
blyglassbeads one of China reflective glass beads factory can offer a wide range of products and reflective glass beads with refractive indices ranging from ≥ 1.5 to 1.9. In addition it is guaranteed that impurities (e.g. iron) are minimized and/or heavy metal contents.
The production of all reflective glass beads confirms to national and international standards (BS6088, EN 1423, EN 1424, AASHTO, etc.).
Individual customer requests are possible with any type of reflective glass beads.
KS Standard Glass Beads,KS Standard Micro Glass Beads,KS Standard Reflective Glass Bead,KS Standard Road Marking Glass Beads
YONGQING BAILUYUAN GLASS PRODUCTS CO.,LTD , https://www.blyglassbeads.com