After the paper is unrolled, it enters the molding machine through the automatic correcting machine. After the paper is unrolled, it enters the molding machine through the automatic correcting machine, the scoring machine and the vibration platform. The slurry of the mixer falls onto the lower paper of the vibration platform and enters the molding machine. Squeeze the gypsum board of the required specification, then complete the initial setting on the solidification belt, complete the final condensation on the conveying roller, cut into the required length (2400mm, 3000mm or other) through the fixed length cutting machine, and turn through the 1# transverse machine. After turning, the two gypsum boards are separated from the 1# horizontal machine at the same time, and then the distance between the two plates is made to meet the requirements by using the close roller, and then distributed into the dryer to be dried by the dispenser. Drying section The fuel-type heat-conducting oil furnace is used as a heat source, and the hot oil is exchanged for hot air through the fin heat exchanger, and then sent to the dryer to complete the drying task. The dryer is divided into 2 zones, which can complete the dry gypsum board well. The drying curve avoids defects such as overburning and drying. The process is environmentally friendly, energy efficient, high in thermal efficiency, and easy to control process parameters. 2# horizontal part After the dryer completes the drying task, it is fed into the 2# horizontal system through the ejecting machine to complete the fixed length trimming and automatic edging of the gypsum board, and then sent to the automatic stacker stack through the finished conveyor. After the stacking is completed Use the forklift to transport to the packing area to inspect the packaging, complete the production process is completed The main technical indicators that should be considered when selecting gypsum board: breaking load, water absorption, surface water absorption, fire stability, flame propagation coefficient. The inner wall of the gypsum board should also consider the sound insulation performance and fire resistance of the wall. Home Decor,Storage Jar,Ceramic Ashtray Home Decoration,Tablewares And Kitchenwares,Mugs AND Cups Co., Ltd. , http://www.nsdecoration.com
Gypsum board forming conveying part