Nowadays, people have a growing demand for hot tubs. In order to meet the requirement of different customers for hot tubs, Aquaspring has designed over 100 hot tub models. But at the same time, some customers have reported that we have too many models and it takes too long to choose the right hot tubs. In order to help you choose the right spa models more quickly, we have specially classified these hot tubs into different categories. You can choose from the categories of number of seater, luxury models and economy models. If you want to looking for a suitable hot tub more conveniently, you can please also send us your needs and we have professional sales representatives to recommend models and provide solutions for you. outdoor spa tubs,outdoor jacuzzi spa,best hot tubs,acrylic outdoor spa,outdoor jacuzzi Foshan Nanhai Halo Sanitary Ware Co., Ltd. , https://www.halobathroom.com
Introduction and characteristics of sleeve type control valve
Introduction and characteristics of sleeve-type control valve: 1. Good valve stability As the sleeve-type valve with the control valve above and below the pressure equalizing hole, you can reduce the role of the media being imbalance in the valve core force, therefore, this valve unbalance than the average Direct single, two-seat control valve is much smaller. In addition, the sleeve-type control valve port in the sleeve and the valve core to form a large guide part, it will not cause the core vibration. 2. Interchangeability and versatility Sleeve type regulator valve sleeve is interchangeable, according to the flow characteristics of the requirements of the window on the sleeve shape, can be designed to equal percentage flow characteristics and linear flow characteristics. Depending on the size of the flow capacity, the number of windows on the sleeve can be designed as four windows, two windows or a window so that the sleeve-type control valve can change the flow characteristics and the flow capacity simply by changing the sleeve. 3. Disassembly easy sleeve-type control valve spool and sleeve installation, no need to use screws, and no lower valve neon so disassembly easy. 4. Valve off a simple shape Simple two-seat valve seat valve body must be installed on the valve cover and the lower cover, and to the two valve compartment, while the sleeve valve can only be installed on the valve cover, and as long as a valve Block partition.