Overview Track type shot blasting machine for surface cleaning of various parts. The surface of various metal castings is cleaned by sand, the surface of ferrous parts is derusted, the burrs and burrs of the stampings are blunt, the surface treatment of forged and heat treated workpieces, and the surface oxide removal of the spring surface and the grain refinement of the surface are all This can be achieved by the shot peening process of this series of equipment. Its application range is very wide, mainly including foundry, heat treatment plant, motor factory, machine tool factory, bicycle parts factory, power machine factory, auto parts factory, motorcycle parts factory, non-ferrous metal die-casting factory, etc. After the shot blasting, the workpiece can obtain a good material color, and can also become a front-end process of blackening, bluing, passivation, etc. of the surface of the metal part, and at the same time providing a good base for plating, paint and the like. . After the shot blasting treatment of the machine, the workpiece can reduce the tensile stress and at the same time refine the surface grain, thereby strengthening the surface of the workpiece and increasing its service life. The shot blasting machine has low noise, low dust and high production efficiency. At the same time, the projectile can be automatically recycled, reducing material loss and reducing cost. It is an ideal surface treatment equipment for modern enterprises. The shot blasting machine model has QDS326\QDS3210\6GN\15GN and so on. Walk-in Bathtub Walk-in Bathtub,vintage clawfoot tub,square freestanding bath,delta freestanding tub,round freestanding tub Guangzhou Aijingsi Sanitary Products Co.,Ltd , https://www.infinityedgehottub.com
Track type shot blasting machine