Glazed tile cleaning method

Tiles are often stained with greasy, embroidered water, and soap scum. In particular, tile seams are more filthy. To keep the porcelain surface clean without damaging the porcelain surface, you can use a multi-purpose decontamination paste to clean it. Tile gaps, you should first use a toothbrush to remove dirt and a little decontamination paste, and then in the gap with a brush to a waterproof agent can not only prevent water seepage and can prevent mold growth.
The vitrified tile cleaning and cleaning method thoroughly cleans all the stains on the tiles first. If there is glue or smear, use a neutral detergent and 3M scouring pad to wipe off. Sprinkle the floor cleaner (use according to instructions) on the floor tile and use a waxing machine to rub the stain on the floor tile clean. The water-based wax is then poured onto a clean dry mop and the wax is evenly spread on the floor tile.
On the surface of the tile after the wax to dry, wait until it can be stamped on the above (can be used to assist the fan dry, generally 8 hours after the wax will be completely dry), if there is a weight to be moved to wait until the wax is completely dry To move, so you can guarantee the brightness of the brick.
After the wax on the surface of the tile has been turned yellow many times and the wax is to be re-applied, the degreasing agent should be used to treat it. The method is as follows: The dewaxing agent is used directly and it is not necessary to add water. Evenly spill on the place where the wax is to be removed, about 10-15 minutes. In addition, after the wax agent penetrates into the floor tile, the floor tile is wetted with water, and the wax needs to be completely removed, otherwise the wax will not shine again. After removing the wax, please follow the above steps to clean and care.

Tile Tile Floor Tile Tile Floor Tile

Electric Valve

Electric valve is a device that drives the valve to open and close by electric motor. It is widely used in various industrial and civil fields, such as metallurgy, chemical industry, petroleum, natural gas, heating, ventilation and air conditioning, automatic control, etc. The following are some application scenarios of electric valves:

1. Fluid control in industrial production: electric valve can be used to control the flow, pressure and temperature of liquid, gas and steam to meet the needs of industrial production.

2. Oil and natural gas industry: electric valves can be used in oil and natural gas exploitation, processing, transmission and storage to control flow and pressure and ensure production safety and efficiency.

3. Chemical industry: electric valve can be used for fluid control in chemical production, such as acid-base solution, gas and liquid reactant control, to ensure the safety and efficiency of production.

4. Heating, ventilation and air conditioning system: the electric valve can be used to control the water flow, air flow and temperature in the heating, ventilation and air conditioning system to meet the requirements of the indoor environment.

5. Automatic control system: electric valve can be used with automatic control system to realize automatic control and adjustment of fluid flow, pressure, temperature and other parameters.

In short, electric valves are widely used in industrial and civil fields, which can improve production efficiency, ensure product quality and improve production safety.

Electric Valve,Electric Air Valve,Electric Control Valve,Electric Exhaust Valve

WUXI KVC-VALVE , https://www.wxkaiweixi.com