Makino Milling Machine at the "25th Japan International Machinery Exhibition (JIMTOF2010)" (session: October 28th - November 2nd, 2010, Venue: Tokyo Ariake International Convention and Exhibition Center) exhibited in the process of processing The component "Fine Surface System" for the tool grinder for dressing the grinding wheel. It was developed for the diamond grinding machine "AGE30 FSS" sold by the company. Equipped with this component, not only can the grinding wheel always be in good working condition, but also it is not necessary to finish the processing of the grinding stone (shaping), thus helping to shorten the processing time. AGE30 FSS is used for the forming of diamond tools. It uses diamond-grinding wheels to machine diamond tools. Due to the collision between the diamonds, if the grinding wheel is not frequently trimmed, the grinding wheel cannot maintain a good machining state. By using the Fine Surface System, the dressing time can be completely eliminated, so the machining cycle can be significantly shortened.
Ductile manhole cover,Iron Manhole Covers, Ductile Sewer manhole cover, Ductile Power Manhole cover, Ductile Electric Manhole Cover Runchun Casting (Zhoushan) Co., Ltd. , https://www.en124casting.com
The assembly is in the form of a wheel dresser on the grinding wheel. This part usually has a nozzle that sprays cutting fluid, but this time the nozzle is placed next to the wheel dresser. The AGE30 can also be equipped with automatic tool detection components, so it can be left unattended for long periods of time. However, with the Fine Surface System, the automatic tool changer (ATC) can no longer be used, so the tool needs to be replaced manually.
Makino exhibits tool grinder components that can be used to trim the grinding wheel during processing
Abstract Makino Milling Machine is on display at the 25th Japan International Machinery Exhibition (JIMTOF2010) (session: October 28th to November 2nd, 2010, Venue: Tokyo Ariake International Convention and Exhibition Center). ..