In our factory, We name those LEDs that can withstand more than 250mA as high power LED. Because of the shape of package, most of through-hole LED cannot handle high current when it's working. In this case, most of high power LED will be package with surface mount device, such as 5050 SMD LED type, 5730 SMD LED type, 2835 SMD LED or high lument package type.
High Power LED,High Power SMD LED,Green high power LED,Blue high power LED,Red high power LED Shenzhen Best LED Opto-electronic Co.,Ltd / BESTSMD CO LIMITED(HK) , https://www.bestsmd.com
Reciprocating pump main structural features and working principle
One. The main structure of the reciprocating pump and the main working principle Working principle: When the piston moves from left to right to form a negative pressure within the pump cylinder, sump liquid into the pump cylinder through the suction valve. When the piston moves from right to left, the liquid in the cylinder is squeezed, the pressure increases, and it is discharged by the discharge valve. Pistons reciprocate, each suction and discharge a liquid, called a work cycle; this pump is called a single action pump. If the piston from time to time, each inhalation and discharge of liquid twice, known as double-acting pump. Pistons move from one end to the other end, called a stroke. Reciprocating pump flow and head reciprocating pump flow and pressure head has nothing to do with the size of the pump cylinder, piston stroke and reciprocation frequency. The theoretical flow of a single-acting pump is: QT = Asn The actual flow of a reciprocating pump is smaller than the theoretical one and decreases as the head increases, due to a loss. Reciprocating pump head and pump flow and pump geometry has nothing to do, but by the pump mechanical strength, the power of the prime mover and other factors. Reciprocating pump installation height and flow adjustment Reciprocating pump start without filling liquid, because the reciprocating pump self-priming capacity, but the vacuum suction height also depends on the installation area of ​​the atmospheric pressure, the nature of the liquid and the temperature changes , So the reciprocating pump installation height also has certain limit. Reciprocating pump flow can not be discharged with the valve on the pipeline to adjust, but should be used by the bypass pipe or change the reciprocation of the piston to change the piston stroke to achieve. Before starting the reciprocating pump, the valve in the discharge line must be opened. The piston of the reciprocating pump is connected with the prime mover by the connecting rod crankshaft. The prime mover motor, steam engine can also be used. Reciprocating pumps for high-pressure head, small flow, high-viscosity liquid delivery, but not for transporting corrosive liquids. Sometimes directly driven by the steam engine, delivering flammable, explosive liquids.