Welcome to visit us, we are the factory of Non Slip Floor Mats producer from China, this series made of pvc and widely used for the runners of wet area, like swim pools and vegetable supermarket, also contain chemcial lab or workshop. General of four size mm and Max 8.0mm for customized orders. Welcome to visit us. Non Slip Mats,Indoor Floor Mat Non Slip,Non Slip Flooring Mats,Stay Put Non Slip Matting,Anti Slip Bath Mats Jiangyin Yining E-Commerce Co., Ltd , https://www.jypvcmatyining.com
3.5mm
Disposable
4.5mm
General type
5.0mm
High quality
6.0mm
Higher quality
8.0mm
Customized
Rotary indexing turning eccentric sleeve clamp
This clamp is used for the C6140 lathe to process the eccentric sleeve as shown. The workpiece can be machined with φ73_(-0.03)~0mm outer end surface and φ115mm inner end surface, groove 2×0.5mm and φ45_0~(+0.027)mm eccentric hole. The clamp has the characteristics of quick clamping, reliability, convenient operation and simple indexing structure. I. Structural principle Rotary indexing turning eccentric sleeve clamp is made up of flange 11, indexing plate 12, three-jaw chuck 14, positioning seat 5, opposite pin 8, knob 6, spring 10, cylindrical pin 9, cone The pin 7, the bushings 4, 15, the balance block 1, the nut 18, the T-shaped groove bolts 16, and the like. The workpiece is positioned with the machined φ15mm outer circle, and is clamped by the three-jaw chuck 14 through the indexing plate.