Cross LED Display,Pharmacy Green Cross LED Display,Pharmacy Cross LED Screens,LED Advertising Display Cross SHENZHEN YGHQ Optoelectronics Co.,ltd. , https://www.leds-smd.com The tool structure is as shown in the figure. First, the screwdriver handle is processed into a hollow body, and the rear end is not good. The aperture size is in sliding fit with the screwdriver neck, and the gap is 0.10 to 0.15 mm. Then, the opening of the handle of the screwdriver is clamped upwards, and the opening is 2.95 to 2.99 mm wide at the center of the hole, and the groove is 8 mm deep. The ends of the groove are to be inverted by 1×30°. Buckle and alignment; the role of this slot is
Screwdriver for two purposes