The paint is one of the important links in home decoration. The good paint can not only make the home decoration effect more dazzling and colorful. It is also very green. So what are the construction steps for wall paint ? What are the methods for painting? Let's take a look together! 1. Wall Paint Steps - Wall Repair Before the paint on the wall, the grassroots floor should be cleaned and there should be no phenomenon of sanding or emptying. For some uneven or potholes, it is recommended to use a special tool to level the wall. 2, wall paint construction steps - putty After the formation of the wall is smooth, putty can be scraped, and the purchased putty can be used according to the instructions. Stir the putty to be even and smooth. Note that there must be no scraping phenomenon. Putty scraping can also reduce the amount of primer and topcoat. 3, wall paint construction steps - wall grinding After scraping the putty, it is necessary to sand flat with sandpaper for some subtle areas. It is advisable to watch the continuous improvement of the wall surface while polishing. 4, wall paint construction steps - paint After the wall is polished, the primer can be applied. The primer has a closed wall, which increases the fullness of the finish. At the same time, the paint can be evenly absorbed and the effect is better. At the same time, brush primer can also reduce the amount of topcoats, which saves money. After the paint has dried, it can be painted. The topcoat needs to start from one point and brush in order, no leakage brush or uneven effect can occur. General paint needs to brush 2 times. How to buy a wall paint : 1, choose the brand The variety of paints on the market is dazzling, and some unscrupulous merchants use real barrels to bury the paint. It does not appear to have any problems in appearance. Therefore, it is recommended that you do your purchase at the regular dealer. 2, see product packaging Positive quality paint seals are good, there will not be stuck with paint, bumps, rust and other conditions, some counterfeit goods currently on the market cover is false, this piece of seal must not be as good as real goods. 3, see if it is enough When you buy paint, you can also shake the paint in the tank by hand. If there is a sound of half a bucket of water, if there is a sound, it means that the paint is not enough. 4, see the quality of paint After the brand paint is shaken with professional equipment, the wall surface that is commonly painted out is uniform in color, free from impurities, and has good fluidity, and there is no hard skin phenomenon. Conclusion: The above is to introduce the construction steps of the wall paint and how to buy the relevant content of the wall paint, hoping to bring help to friends in need. If you need to learn more about the later stage, please pay attention to this site. Electric Supplies,Electric Supplies For Sale,Electrical Supply Store,Wholesale Electric Supply Shanxi KathayTech Co.,ltd. , https://www.jdsmachine.com
How to choose a wall paint