In the previous article, we have mentioned information about latex paint , which is an essential coating in the decoration process. In the process of construction of rubber paint, there will be many problems. For example, is it feasible to apply wallpaper on latex paint ? How to operate? Let's let the decoration home decoration network Xiaobian to introduce different solutions to different situations!
Surface conditioning non woven Sanding Belt
The non-woven, open web, durable construction is designed to resist loading and greatly increase the life of the Belt. Standard Abrasive Non-Woven Discs and Belts offer repeatable finishes for a wide variety of applications.
Application:
We distributes and wholesales various brands of Abrasive Sanding Disc, Cutting Wheels , Abrasive Flap Disc , Flap Wheels , Flap Disc Backing Pad, Flap Disc Adhesive , Abrasive Machine and Surface Conditioning Product etc, and enjoy a high position among consumers. abrasive sanding belt non woven,Nylon abrasive sanding belts,nonwoven sanding belt,non woven sanding belts,sanding belt for surface conditioning Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jd-abrasives.com
Originally, the wall was painted with latex paint, but after many years of use, the wall appeared dirty and yellow. To retouch the original appearance, some owners wanted to put wallpaper on the latex paint. This is feasible, but specific operations need to be noted.
1. Firstly, it is necessary to check the firmness of the latex paint wall and stick the wide transparent tape to the wall. After 3-4 minutes, it will be quickly torn off. If there is no problem of the whole piece of putty powder falling off, the wall can be explained. The firmness is still good. Otherwise, you need to re-care the wall.
2. After the wall is tested, some wallpaper base film should be used for the latex paint wall to protect the wall for later construction. When the wallpaper base film is dry, it can be wallpapered.
The latex paint is attached to the wallpaper, and the latex paint is hollowed or peeled off. The wallpaper glue sticks the latex paint tightly, while the latex paint and the putty are completely layered, and the putty is like an empty display.
1. The base film must be brushed before the wallpaper is applied, and the base film is selected for different base layers. Because the latex paint wall surface is special, it is necessary to use a professional base film in a targeted manner.
2. For the professional base film of the latex paint wall surface, a layer of impervious protective film can be formed. This protective film has a good protective effect, so that the moisture in the glue does not penetrate into the latex paint, and the putty does not It is swelled by moisture. Of course, if the base film selected is wrong, there may be a phenomenon of empty drum peeling.
3. Before brushing the base film, don't forget to check the firmness of the latex paint wall. For the specific method, refer to the first step in Case 1.
4. Stick the wallpaper on the latex paint. It needs to be coated with thick glue. The action should not be too large. It needs to be light and fast, and it is not necessary to repeatedly press the seam. In this way, the water is not much after the wallpaper is glued, even if it penetrates a little, it will not penetrate too deep, and the moisture will not reach the putty layer.
Through the introduction of the decoration of the above decoration home, the wallpaper on the latex paint is feasible, but the operation must be very careful, the material should be selected correctly, in order to achieve the desired effect! For more related knowledge, please pay attention to the decoration encyclopedia section!
This product is made of high quality nylon nonwoven material and great aluminum oxide. It is applicable to handheld and automatic grinding apparatus,with elasticity and small grind,can be good to improve the grinding workpiece ,and easy to replace.
Compared with the traditional abrasives products,nylon abrasive belts have the following advantages: can control the minimum amount of grinding mil,.grinding depth anti-blocking,the minimum of tolerance probability,new abrasives grain continuously exposed in the grinding process,and good effect.
Providing additional strength and durability for removing paints,rust, corrosion, exit burrs, weld splatter, parting lines and deburring on ferrous and nonferrous metals.
Blending weld seams and deburring edges
Is it feasible to stick wallpaper on latex paint?