Broken bridge doors and windows, full-name thermal break aluminum doors and windows profiles, is a non-metallic, low thermal conductivity, cold conductivity coefficient of the separator sandwiched between the aluminum profile, can get excellent insulation (cold) performance of aluminum profiles, which is Because the heat passes through the heat-conducting aluminum alloy and conducts to the non-metal separator, the heat (cold) conduction is blocked, and the heat (cold air) is not transmitted to the inner wall. Such an aluminum profile is called a broken bridge aluminum profile. Next, Xiao Bian introduced to you what is the characteristics of broken bridge doors and windows and broken doors and windows. What is broken bridge doors and windows Broken bridges in doors and windows are unique to aluminum alloy doors and windows. Broken aluminum doors and windows are also called heat-insulating and energy-saving aluminum alloy doors and windows. Doors and windows made of broken aluminum and hollow glass are used. There are two kinds of production methods, one is to use heat insulation strip material and aluminum profile, and the heat insulation bridge is formed through mechanical opening, rolling, stripping, etc., and the other heat insulation material is poured into the insulation of aluminum alloy profiles. In the body, after being cooled and solidified, the heat-insulating bridge is formed by removing the process such as breaking the bridge, which is called a cast-type heat-insulating material. Broken Bridge Doors and Windows Features 1. Preventing condensation: The temperature of the inner surface of the profile with the insulating strip is close to the indoor temperature, which reduces the possibility that the indoor moisture will condense on the surface of the profile due to over-saturation. Energy Saving: In winter, the window frame with thermal insulation can reduce 1/3 of the heat lost through the window frame; in summer, if there is air conditioning, the window frame with thermal insulation can More to reduce the loss of energy 3. Protecting the Environment: Through the application of thermal insulation systems, energy consumption can be reduced, and environmental radiation due to air conditioning and heating can be reduced. 4. Health: The exchange of heat between the human body and the environment depends on the temperature of the indoor air, the speed of air flow, and the temperature of the outdoor air. By adjusting the temperature of doors and windows to make it not lower than 12-13 °C, it has reached the most comfortable environment. 5, reduce noise: the use of different thickness of the hollow glass structure and thermal break bridge aluminum cavity structure, can effectively reduce the acoustic resonance effect, prevent sound transmission, can reduce noise more than 30dB. 6. Colorful and colorful: After anodizing, powder spraying, and fluorocarbon spraying, it can produce aluminum profiles of different colors. After rolling and pressing, the insulated aluminum alloy doors and windows produce indoor and outdoor two-color windows of different colors. Broken Bridge Doors and Windows Installation 1. Positioning and Discharging: The glass doors combined with the fixed glass and the movable glass door are unified to carry out the positioning. According to the requirements of the design and construction drawings, the positioning line of the glass door is released, and the position of the door frame is determined to accurately measure the elevation of the ground and the height of the door frame and the height of the middle cross frame. 2. Limiting slot at the top of the mounting frame: The width of the limiting slot should be greater than the thickness of the glass 2-4mm, and the depth of the slot is 10-20mm. During the installation, two metal decorative board edges are drawn from the middle line of the bullet, and then the limiting groove at the top of the door frame is installed according to the edge line. The groove depth in the slot is adjusted by a glue pad. In addition to the wood lining, the limiting slot is made of 1.5mm steel plate pressing, steel plate welding and aluminum metal profile lining outsourcing stainless steel. 3, the installation of metal veneer cotto: first fixed on the floor of the wood, and then use the adhesive to glue the metal veneer on the wood, wood can be directly nailed to the embedded brick, or through the expansion bolt The connection method is fixed. If the aluminum alloy square tube is used, it can be fixed on the frame column with an aluminum angle, or be fixed on the wooden brick embedded in the ground with a wood screw. 4. Install the vertical door frame: Connect the centerline of the bullet to the door and frame the square wood, and then use the plywood to determine the shape and position of the door frame column. Finally outsourcing metal decorative surface. When decorating the bag, place the facing seams on the head in the middle door position on both sides of the installation glass. Seam location must be accurate and ensure vertical. 5. Install the glass: Use a glass sucker to suck the thick glass, then hold the suction cup to lift the thick glass plate by 2-3 people and move it to the installation position. Then insert the top of the glass into the limit slot at the top of the door frame. Then place the lower part of the glass on the bottom support. The lower part of the glass is aligned with the center line, and the edges of both sides just close the metal ornaments on the outside of the door frame. It is required that both the inside and the outside cannot see the veneer and take over the mouth. 6, fixed glass: in the bottom of the wooden side of the nail on the inside and outside the nail two small square wooden bar in the door in the thick glass, square bar from the glass plate surface 4mm or so, and then in the square bar brushing all-purpose adhesive, will The decorative metal sticks to the square bar. 7. Injection glass seal: Inject glass seal on both sides of the top limit slot and the bottom bracket opening, and on the gap between the thick glass and the frame column, etc. Start at the end of the gap and fill it with uniform speed along the gap, so that the glass glue forms a uniform straight line on the surface outside the gap, scrape off excess glass glue with a plastic sheet, and wipe the glue trace with a cloth. 8. Docking between glass: When the fixed part of the glass door needs to be spliced ​​due to its large size, the seam must have a width of 2-3mm, and the edge of the glass plate should be chamfered. After the glass is fixed, the glass glue is injected into the butt gap. After filling, the plastic sheet is used to scrape the glue on both sides of the joint of the glass plate, so that the gap forms a clean uniform straight line, and the glass surface is wiped clean with a clean cloth. 9. Installation of moving glass door leaf: Before the door leaf is installed, the positioning pin of the ground floor spring and the top surface of the door frame shall be positioned and installed. Both axes must be coaxial, and the vertical line shall be checked during installation to ensure the center of the ground spring and positioning pin. The line is in the same straight line. 10. Install the glass door upper and lower door clamps: Place the upper and lower metal door clamps on the upper and lower ends of the glass door leaf, and measure the height of the door leaf. If the top and bottom margins of the door leaf exceed the specified gap between the door's horizontal frame and the floor, that is, the height of the door leaf is not enough, the bottom of the glass door in the lower door clamp can be padded with wooden cleats. Editor's summary: What is the characteristics of the broken bridge doors and windows and broken doors and windows are introduced here, I hope to help everyone. If you want to know more related information, you can pay attention to this website information. Broken Bridge Doors and Windows Garden Light,Solar Garden Wall Light,Outdoor Garden Lights,Garden Lamp Post NINGBO ZHENGUO INTELLINGENT LIGHTING CO.,LTD , https://www.intellingentlighting.com
What is the characteristics of broken bridge doors and windows broken doors and windows?