Jinyi metal sheet mid-slab production line is mainly used for strip cutting processing of sheet metal products. Currently, KJS120 and KJS60 series slitting and slitting lines are widely used by customers. About 6mm customers, according to their own needs, you can choose this metal plate slitting machine production line. Expanded metal is sometimes considered an alternative to sheet metal or wire mesh. It combines some of the best features of both-providing a material that is stronger than thin wire mesh and has better air flow and drainage than sheet metal. Expanded Metal Mesh,Element Expanded Metal Mesh,Aluminum Expanded Metal Mesh,Ss Standard Expanded Metal Mesh HEBEI KAYI BUILDING MATERIAL TECHNOLOGY CO.,LTD , https://www.kayimesh.com
The Jinyi metal plate flying shear production line is mainly used for high-speed shearing of metal plates. The high shear rate can reach 100m/min, and the cutting accuracy is about 0.15mm, which provides a high level for material suppliers such as mass production and users of large hardware accessories. Efficient precision high speed flying shears cutting equipment.
Jinhan Hi-Tech Products: Metal Plate Flying Shear Production Line and Metal Sheet Mid-Strip Production Line Certificate: 
Warmly congratulate the flying shear production line and middle plate production line developed by our company to obtain high-tech product certification
The Guangdong Provincial Department of Science and Technology reviewed the metal plate flying shear production line and the metal plate mid-slab production line developed by our company as high-tech products. At this point, our company already has five high-tech products, previously identified three are three-in-one feeder, metal sheet cross-cut production line, slitting production line.