Temporary Fence,Construction Site Fence Panels,Outdoor Fence Temporary Fence,Outdoor Temporary Fence Anping Xinlong Wire Mesh Manufacture Co.,Ltd. , https://www.hbzhaoxuan.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>SKF bearing extra life and extra dynamic load SKF bearing extra life and extra dynamic load
1. The bearing life is under the effect of certain load; the number of revolutions or hours experienced by SKF bearings before pitting corrosion; /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
Because of the accuracy of production; the difference in the degree of uniformity of the data; even the same data; the same batch of bearings of the same scale; used under the same operating conditions; the length of life is not the same. If the calculated life is 1 unit; the longest The relative life is 4 units; the shortest is 0. 1-0. 2 units; the ratio of the longest to the shortest life is 20-40 times.
To determine the specification of the SKF bearing life; the bearing life is related to the reliability.
2, a number of bearings with the same standard of life (type, data, process); use under the same operating conditions; 90% of the bearings do not pitting; the number of revolutions or hours experienced is called the additional life of the bearing .
3. The fundamental extra dynamic load is the bearing capacity of the anti-pitting corrosion of the SKF bearing; the extra life of the regular bearing is one million revolutions (106); the maximum acceptable load is the fundamental additional dynamic load; indicated by C.
That is, the SKF bearing is under the effect of additional dynamic load C; the reliability of this bearing operation of one million revolutions (106) without pitting failure is 90%; the larger the C, the higher the bearing capacity.
About the fundamental extra dynamic load 1) The radial bearing refers to the pure radial load 2) The thrust ball bearing refers to the pure axial load 3) The radial thrust bearing refers to the radial weight where the pure radial displacement occurs.
Recommend to friends comments close window Bearing related knowledge TIMKEN bearing preloading intention and method "correct application method and fault cause" of the rolling bearing. The reason for the oscillation of the large mesh oscillating screen rolling bearing is the smooth handling of the oil film NSK bearing oil before the slewing bearing device
This article links to http://
Please indicate the bearing network http://
Previous: Bearing device common sense (1)
Next: Analysis of several methods for bearing rust prevention
SKF bearing extra life and extra dynamic load
Source: China Bearing Network Time: 2014-01-07