Why are a large number of PV companies failing to enter the access list?

Abstract On the 31st of last month, the Ministry of Industry and Information Technology officially announced the list of enterprises that met the "Regulations for Photovoltaic Manufacturing Industry" by enterprise declaration, provincial-level industrial and information administration authorities to verify recommendations, expert review, online publicity and on-site sampling inspection. Xuzhou produces polysilicon raw materials, polycrystalline silicon ingots and slicing,...
After the enterprise declaration, provincial-level industrial and information administration authorities verified the recommendation, expert review, online publicity and on-site sampling inspection, on the 31st of last month, the Ministry of Industry and Information Technology officially announced the list of enterprises that met the "Regulations on Photovoltaic Manufacturing Industry". Xuzhou City, the three backbone enterprises producing polysilicon raw materials, polycrystalline silicon ingots and slicing, battery components - Jiangsu Zhongneng Silicon Technology Development Co., Ltd. (polysilicon), Jiangsu GCL Silicon Materials Technology Development Co., Ltd. (silicon ingots, silicon wafers) Jiangsu Aide Solar Technology Co., Ltd. (component) was selected.

It is understood that there are currently more than 500 PV companies across the country, and only 109 of them entered the first batch of “Conditions”, and about 80% of them failed to be shortlisted. Jiangsu Zhongneng Silicon Industry Co., Ltd., which entered Xuzhou City, has a production capacity of 65,000 tons, accounting for 56% of the total production capacity of 115,000. In 2013, the output of 50,000 tons increased by 35% over the previous year, accounting for nearly 70% of the national output. Jiangsu GCL Silicon Materials Co., Ltd. has a capacity of 10 GW of long crystal ingots, accounting for 40% of the ingot production capacity of the public list; in 2013, silicon ingots produced 9 GW of silicon wafers, accounting for 50% of the domestic supply, and the wafer market circulation 75%. Jiangsu Aide Company has a solar cell module production capacity of 600 megawatts, a solar cell production capacity of 200 megawatts, and a solar photovoltaic power generation system with a capacity of 200 megawatts. It is a leading enterprise in the production of domestic battery components.

Why are a large number of companies failing to enter the list? Kong Weiqiang, director of the Electricity and Energy Department of the Municipal Economic and Information Commission, told reporters that it was mainly due to the following four situations: First, it failed to pass the environmental impact assessment; second, the capacity or capacity utilization rate was not up to standard; third, it did not have independent research and development institutions and technologies at or above the provincial level. The center or high-tech enterprise qualification, research and development and process improvement costs are insufficient; fourth, the product attenuation rate and water consumption, energy consumption and other indicators have not met the requirements. Kong Weiqiang specifically analyzed that the criteria set out in the "Conditions" are not low. For example, in terms of production, polysilicon companies need to reach 1,500 tons per year, and wafer companies need to produce 25 million pieces. In addition, a series of technical requirements have been proposed for enterprises. For example, the conversion efficiency of polycrystalline silicon and monocrystalline silicon cells is not less than 16% to 17%, and the photoelectric conversion efficiency of components cannot be lower than 14.5%.

“Polysilicon enterprises that do not meet the “Conditions” are basically due to production stoppages or production cuts in 2012, resulting in production of less than 50% of annual production capacity.” Lv Jinbiao, Vice President of GCL-Poly Energy Holdings Co., Ltd., was interviewed by this reporter. Said, "When the second batch of declarations, these enterprises will still not meet the "conditions" because of the suspension of production in 2013."

“With the increase in industrial concentration and the acceleration of the survival of the fittest, the industrial adjustment in 2014 will be even more cruel.” Lu Jinbiao said: “The production of polysilicon from silane fluidized bed technology has been mass-produced, with higher quality and lower cost. Polysilicon products with less than half of the improved Siemens technology will be put into the market in large quantities, and a new round of reshuffle will be ushered in."

Solar Charge Controller

We supply various Solar Charge Controller with output voltage 13.8V or 12V/24V.

This series solar power controllers have a compact appearance, and can be installed easily.

Utilize advanced electronic controlling technology to transit solar power into electric power for electrical appliances, white at the same time store superfluous power in the cell. The intelligent CMOS chips inside give real time control as well as display the working status and providing multiple protections.

Iteal controller for solar power system.

Solar Charge Controller, Solar Power Controller, Solar Charge Controllers,Battery Regulator Charger

NINGBO LONGFLIGHT INTELLIGENT TECHNOLOGY CO.,LTD , https://www.long-flight.com