Complex Screw Machined Parts,Cnc Machined Stainless Steel Parts,Threaded Parts,Stainless Steel Threaded Parts Stand Dragon Industrial Co., Ltd. , https://www.standdragontw.com
1. The air inlet and outlet of the dehumidifier must not be obstructed.
2. The wheel dehumidifier should be prevented from being in the central position of the room.
3. The condenser should be cleaned from time to time and kept clean.
4. If the humidity of the air is too high, the humidity can be adjusted by the humidity controller, and it is most suitable to maintain 45%~60%. When using, close the doors and windows as much as possible to make the dehumidifier achieve the best dehumidification effect. The body should be placed flat and should not be tilted or sloping to avoid malfunction or abnormality of the machine.
5. When the ambient temperature is lower than 15 °C, the water droplets attached to the surface of the evaporator will condense into ice and the dehumidification effect will be weakened; if the surrounding temperature is higher than 40 °C, the pressure in the system will increase and the compressor will be overloaded. Causes the compressor motor to be damaged. Therefore, the optimal humidity range of the wheel dehumidifier is 15 °C ~ 40 °C.
6, the wheel dehumidifier should regularly clean the filter gas network to maintain the machine dehumidification, dust removal effect and life. The filter gas mesh can be washed in water below 40 °C, and it is better to clean with detergent. After washing off the dust, rinse it with water, dry it and put it back into the body. Wipe gently with a damp cloth when cleaning the body; do not directly wash the water to avoid damage to the electrical insulation. If there is adhesive on the surface of the body, it can be washed with soapy water to avoid spraying with gasoline, petroleum spirit, solvent or spray insecticide to avoid paint stripping or discoloration.
7. After the wheel dehumidifier has been moved, it is best to sit for 4~6 hours, and use it at startup. Because the compressor line in the dehumidifier contains refrigerant, after moving, the refrigerant should be 4~6 hours. Rub the amount back to the original position.
8. When the power is off or not used for a long time, please unplug the power cord to maintain the life of the machine.
Article from: Industrial dehumidifier related articles:
Glove box wheel dehumidifier TRL-500SP
Standard rotary dehumidifier TRL-550P
Low dew point wheel dehumidifier TRL-650DP 
Day maintenance of runner dehumidifier