The main product related to abrasives is the abrasive belt cleaning block
Main features
1. For maximum protection in
any shop
2. Removes accumulated particles
3. Increases the lifetime of
sanding belts and discs up to 500%
Our abrasive cleaner sticks are
the easiest solution for cleaning/unloading abrasives. Increase the life of new
sanding belts and discs up to 10 times as long with our quality abrasive belt
cleaners. Simply press the cleaner stick lightly against moving sanding belts
and discs to remove clogged-up pitch and saw dust. Improves the finish quality
and prevents burns and marking. Cuts down the frequency and costs of belt
replacement.
Remove gum buildup on your
sanding discs and belt sanders with this amazing Sanding Belt cleaner. The
sanding belt cleaner instantly cleans sanding belts of all grits and removes
the accumulated particles that lodge between the abrasive grains and cause a
dull cut. Increase the life of sanding belts and discs up to 500% with this sanding
belt cleaner
We distributes and wholesales various brands of Abrasive Sanding Disc, Cutting Wheels , Abrasive Flap Disc , Flap Wheels , Flap Disc Backing Pad, Flap Disc Adhesive , Abrasive Machine and Surface Conditioning Product etc, and enjoy a high position among consumers.
Product Description
This crepe-rubber belt cleaner
quickly removes gum and grit from belts and discs without damage. Just press
the cleaning block against your sanding belt or disc until it is clean. That is
all there is to it. Extend the life of your belts or discs with this innovative
natural cleaner.
Clean sanding belts and discs
for optimal performance
Abrasive belt & disc
cleaner removes residue to unclog loaded sanding belts or discs. The
easy-to-use cleaner comes in handy on the job site or at home for anyone from
professionals to do-it--yourself, and using the cleaner will extend the life of
the sandpaper and orbital machine or belt sander - whichever you use. Run the
abrasive cleaning stick across the belt or disc to remove unwanted gunk and
make a smooth surface for optimal performance.
Expand the life of your belt
sander, orbital machine and sandpaper with the Abrasive belt & disc
cleaner. It removes residue to keep it from clogging sanding belts and discs.
1. remove residue on sanding
belts and discs with Abrasive belt & disc cleaner
2. abrasive cleaning stick
From the Manufacturer
The abrasive belt & disc
cleaner is for all-purpose, wet or dry sanding. The flexible rubber
construction works better.
Rubber Cleaning Block,sanding disc rubber cleanning,Abrasive Cleaning Block,Abrasive Paper,Abrasive Related Products Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jd-abrasives.com
Pressed steel plate connection
Pressed steel plate connection is mainly divided into vertical and horizontal pressure steel plate longitudinal overlap should be located in the sand or wall beam, two plates should be extended to the support member, the length of the connection: high wave roof is 350mm; Low-wave roofing with roof slope less than or equal to 10% is 250mm, low-wave roofing with roof slope greater than 10% is 200mm, and wallboards are all 120mm. When the roof is overlapped, there must be a long sealing tape between sheet seams. The horizontal lap joint direction of the horizontal connection pressure profile steel connection should be consistent with the dominant wind direction, the lap joint should not be less than one wave, and the lap joint part should have a long sealing tape.