Bedroom decoration mattress care also need to pay attention

For the family's health, we must know the correct maintenance of the mattress: to avoid excessive deformation of the mattress when handling, do not bend or fold the mattress, do not tie directly with the rope; do not let the mattress under stress, avoid long Time to sit on the edge of the mattress or allow children to jump on the mattress so as to avoid local pressure, causing metal fatigue affect the elasticity; To turn the mattress on a regular basis, you can turn upside down or end to end, usually the family 3 to 6 months transposition One time only; besides using bed sheets, it is best to put on a mattress cover to prevent the mattress from becoming soiled and easy to wash to ensure that the mattress is clean and hygienic; remove the plastic bag when using and keep the environment ventilated and dry to avoid moisture on the mattress. Do not expose the mattress to excessive light for a long time to avoid fading.

● The first problem is the handling of the mattress. Do not bend or fold the mattress on the transporter. If the mattress is attached to a handle, do not use the handle to handle it because it is used to adjust the position.

● Many people ignore the problem when they use the mattress for the first time: They do not remove the plastic packaging film on the surface. In fact, this is a wrong practice. Because the bag is removed to ventilate the inside of the mattress, keep it dry and avoid moisture. After removing the packaging film, the mattress can be covered with a cleaning pad or mattress so that it can be kept dry and clean for a long period of time.

● When it comes to sheets, be sure to buy sweat-absorbent ones. Don't tighten the sheets and mattress when using, so as not to block the ventilation holes of the mattress and cause the air inside the mattress to circulate and grow pathogens.

● The mattress should be turned over regularly. In the first year, they are flipped every two to three months. The order includes the front and back sides, the left and right sides, and the four sides, so that the springs of the mattress can be stressed and the service life is extended. After the second year, the frequency can be slightly reduced, and it can be turned in half a year.

● Keep clean. Clean the mattress regularly with a vacuum cleaner but do not wash it directly with water or detergent. At the same time, to avoid lying directly after bathing or sweating, not to use electrical appliances or smoking in bed.

● Mattresses should be kept under heavy pressure. For example, do not often sit on the edge of the bed. This can easily damage the edge protection spring because the four corners of the mattress are the most vulnerable. Do not apply pressure on the surface of the pad to prevent it from being affected by local depressions in the mattress. In addition, do not allow children to jump in bed so as not to suffer a single point of damage to the ambassador's spring.

● If you inadvertently tip over other beverages such as tea or coffee in the bed, immediately use a towel or toilet paper to forcefully dry it with a heavy pressure and then dry it with a hair dryer. When the mattress is not contaminated with dirt, wash it with soap and water. Do not use strong acid and alkali cleaners to avoid discoloration and damage of the mattress.

Misunderstanding of the mattress maintenance 1. As long as the mattress is not bad, there is no need to replace. Generally speaking, the spring mattress has an effective service life of about 10 years. In other words, mattresses that have been used for ten years have been subjected to long-term stress due to the springs, causing their elasticity to undergo a certain change, resulting in a drop in the degree of fit between the body and the bed, and the human spine cannot be most effective. The support is in a bent state. So even if there is no local damage, you should replace the new mattress in time.

2. The more springs the mattress has, the better the quality of the mattress. There are many determinants of the quality of the mattress, and the number of springs can only explain one problem, namely, the stronger the bearing capacity of the spring. When choosing a mattress, the capacity of the mattress needs to be adapted to your needs.