1. The light pole is an octagonal or twelve-corner tapered rod body. It is cut, bent and automatically welded by high-strength high-quality steel plate. The general height is 2 5, 30, 3 5 and so on. The design has the maximum wind resistance. Up to 60 m / s, each size consists of 3 to 4 sections. With flanged steel chassis, diameter 1 to 1.2 meters, thickness 3 0 to 40 mm. 2. The function is mainly frame structure, and the main materials are decorative steel and steel pipes, and the light pole and lamp plate are treated by hot dip galvanizing. 3. The electric lifting system consists of an electric motor, a winch, three sets of hot dip galvanized steel wire ropes and cables. The pole is mounted inside and the lifting speed is 3 to 5 meters per minute. 4. The guiding and unloading system consists of the guiding wheel and the guiding arm to ensure that the lamp plate does not move laterally during the lifting process. When the lamp plate is raised in position, the lamp panel can be automatically detached and locked by the hook. 5. Lighting electrical system set 6-2 4ç›4 0 0 w1 1 0 0 0 w gold halide (white light), flood light, floodlights, computer time controller can automatically control the switch light time and part of the lighting or full illumination, 6. Lightning protection system: 1.5 meters long lightning rod is installed on the top of the lamp, and a 1 meter long grounding wire is installed in the underground foundation and welded with underground bolts. LED Cartoon Mushroom Lights,Outdoor Mushroom LIGHTS,Cartoon Mushroom Lights,Cartoon Mushroom Lights Sichuan Kangruntengpu Photoelectric Technology Co., Ltd. , https://www.kangruntoplighting.com
High pole light main configuration introduction