Air-cooled heat transfer oil pump features and methods of use

Air-cooled heat transfer oil pump with good performance and advantages, can play an important role in use. Air-cooled heat transfer oil pump using advanced technology and processes for production, high efficiency, long-term stable operation in the hot state no leakage, no additional cooling system, the use of safe and reliable, in China's heating system heating system has been Wide range of uses, has entered the petroleum, chemical, rubber, plastics, pharmaceuticals, textiles, printing and dyeing, roads, food and other industrial fields. Air-cooled high-temperature heat transfer oil pump is mainly used for conveying non-solid particles of weakly corrosive high temperature liquid, the use of temperature ≤ 370 ℃, is an ideal circulating pump. The pump widely used in high temperature paper lunch box stereotypes, dynamic vulcanized tire and reclaimed rubber machinery, slab vulcanization, rubber, drying, feed drying, printing and dyeing, chemical industry, plywood production, waterproofing membrane production, asphalt heating, noodle drying and other industries . Air-cooled heat transfer oil pump in a wide range of industries to promote the use of a wide range of good performance and advantages to promote the application of heat transfer oil pump in the industry, in different environments. Air-cooled heat transfer oil pump has good advantages and features, the use of advanced technology for the production, the following describes the process and advantages of the pump: (1) RY series of air-cooled heat pump is based on digestion and absorption of foreign oil pump developed The second generation of products, the basic structure of single-stage single-suction cantilever foot support structure, the import of hot oil pump axial suction outlet vertical center up, and the same motor mounted on the base. (2) the combination of packing seal and mechanical seal, packing seal with high temperature packing, has good thermal adaptability, and mechanical seal is the use of high mechanical strength, good wear resistance of cemented carbide material, to ensure High temperature sealing performance. (3) Third-generation polytetrafluoroethylene (referred to as PTFE) lip seal, the sealing performance has been a leap forward than the rubber seal reliability increased by 25 times, extremely strong corrosion resistance. (4) RY-type heat-conducting oil pump support the use of double-ended ball bearing structure, the front end with lubricating oil lubrication, the rear end with grease lubrication, the middle of a guide pipe, to observe the sealing at any time and the recovery of HTF. (5) The self-heating cooling structure is adopted to change the traditional water cooling structure so that the structure is simple, the volume is small, the running cost is saved, the performance is good, and the use is reliable. The structure and performance of air-cooled heat transfer oil pump make it widely used and promoted in different fields and industries. It can withstand high temperature and has good sealing performance under high temperature. It is a significant leap in the oil pump industry.

Hexagonal Wire Mesh

Chicken Wire,Chicken Wire Mesh,Hexagonal Wire Netting,Hexagonal Chicken Wire Mesh,Galvanized Hexagonal Wire Mesh,Pvc Coated Hexagonal Wire Mesh

Anping Sanxing Wire Mesh Factory , https://www.anpingsanxingwiremesh.com