Windows, doors, windows, aluminum alloy
Shower niche
The shower niche is a space for storing and placing items. It is recessed on the wall and does not occupy the space of the bathroom. It has a very good expansion function. Our shower niche are made of high-quality stainless steel, which is strong and durable, not easily deformed, and has excellent decorative properties.
Shower Niche,Shower Niche Insert,Shower Niche Shelf,Tile Shower Niche Jiangmen MEIAO Kitchen And Bathroom Co., Ltd. , https://www.meiaosink.com
Problem 1 aluminum alloy doors and windows leaking water
Occasionally, aluminum alloy door and window frames are found leaking water at the joints with the wall, especially in the lower corners of the window. Secondly, water seepage occurs at the splicing section of the composite window.
Corresponding measures: 1. Due to the different coefficients of thermal expansion of the aluminum alloy profile and the wall material, under the influence of temperature, the capillary cracks are likely to occur at the junction between the frame body and the wall body. In order to prevent water seepage at the cracks, the aluminum alloy door and window frame should be elastically connected to the wall body. Before construction, the floating ash, mortar particles and other debris in the joint groove should be removed first, and then the inside and outside of the frame jointed with the wall body should be marked. The sealant is closed, the glue injection should be continuous, do not omit, and the bond should be firm. 2. The exposed connecting screws should also be sealed with a sealant to prevent water leakage.
Problem 2 The installation of aluminum alloy doors and windows is not firm and the overall stiffness is poor
The aluminum alloy door and window frame cracks at the junction with the wall; when the door is pushed or opened and closed, the frame fan shakes; when the air pressure is applied or pushed by hand, the window frame is deformed and shaken, giving a sense of insecurity.
Preventive measures: 1. Aluminum alloy doors and windows should be based on the size of doors and windows, installation height, choose the right profile. 2. When the door and window frame are installed, reliable connection shall be made between the connector and the wall. The connecting piece shall be made of thin steel plate with a thickness of not less than 1.5mm and be treated with antiseptic. The connection method generally uses expansion bolts and injection needles embedded in the wall. 3. After the aluminum alloy doors and windows are installed, they can be used to push the door and window frame for inspection. If they are found to be shaken or deformed, they should be reinforced.
Put a good aluminum plastic door and window installation
Aluminum-plastic doors and windows are widely used in the current homes. In the actual installation and construction, if you do not pay attention to some details, it will often leave hidden dangers for future use. Now experts are invited to teach you to install it.