1, spade wall. In the wall treatment, the old wall should be completely eradicated, so as to effectively prevent the paint or putty of the old wall from affecting the newly-created wall, leading to cracking and kicking. 2, knock the old wall. When the room type needs to be changed, special treatment is also required at the connection between the new wall and the old wall. In other words, knock out a small part of the old wall and fill it with caulking paste, then apply a bandage. Otherwise, it will be the main part of cracking in the future. 3, cover cracks. If there is a small crack in the original wall, it should be affixed with a decorative bandage before the batch. Its good covering effect can cover all the cracks and ensure that the stucco wall is firm and not easy to crack. 4, paste bandages. If water and electrical conduits are laid in the wall, then in addition to cementing the open slots, special decorative bandages should be affixed to them, otherwise cracks will easily develop in these places. 5, brush glue. After applying a decorative bandage, it is not necessary to leak the glue of the brush. The glue can completely bind the bandage to the wall. Otherwise, the putty and paint applied on the surface can easily start to affect the appearance of the wall. 6, the ink line. If the walls of two sides facing each other are painted with different colors, the normative company will use ink lines on the inside corners of the walls to ensure the straightness of the junction. Otherwise, it is often difficult for workers to achieve visually satisfactory results. 7, do Yang angle. When inserting the wall, no matter how good the workers are, it is very difficult for the workers to scratch the Yangjiao line. The standard method of operation should be to use an aluminum alloy ruler on one side and a wall on the other side to ensure the effect. . 8, approved putty. Different from the traditional small scraper, the standard company will use a large scraper to wall. The wall surface that was approved with it was not only smoother, but also saved time and effort, and accelerated the construction progress to some extent. 9, finely polished. After finishing the wall, you need to sand the wall again to get the next job. At this time, the regulated company will use the light source made of fluorescent lamps or large light bulbs to polish while observing the smoothness of the wall. 10, make up the wall surface. After finishing the primer on the wall, the worker will check the walls for cracks again. If found, repair and smooth them with putty. This completely eliminates possible wall cracking in the future. Decoration company three trees lacquer decoration company coating paint aluminum alloy Gusjnk kitchen accessories provide everyday efficiency with style. Designed to keep your drainpipe clear, and the color kitchen sink strainer is a perfect finishing touch for your sink. Made of SU304 steel and durable ABS plastic, the strainer is removable for easy cleaning, and allows water to flow freely while trapping food particles and debris. Available in multiple colors to match your kitchen sink and complement your decor. Sink Accessories,Kitchen Sink Accessories,Farmhouse Sink Accessories,Farm Sink Accessories Guangdong Huayou Hardware Products Co.,Ltd , https://www.gudsink.com
How to paint the perfect wall with paint