Nature Flooring Del Floor Socket Decoration Decoration Company Switch Decoration Design Floor Tile Grille Light Tiling Plastic Floor Tiles
Annealed Wire is made of carbon steel wire, used for weaving, baling in general. Applied for home use and the construction.
Annealed wire is obtained by means of thermal annealing, endowing it with the properties it needs for its main use - setting. This wire is deployed both in civil construction and in agriculture. Hence, in civil construction annealed wire, also known as [burnt wire" is used for iron setting. In agriculture annealed wire is used for bailing hay.
ANNEALED WIRE FOR CIVIL CONSTRUCTION:
Wire Materials: Iron Wire or carbon steel wire. Galvanized Wire,Pvc Coated Wire,Galvanized Tie Wire,Black Binding Wire,Black Annealed Wire Anping Sanxing Wire Mesh Factory , https://www.sanxingwiremesh.com
Winter acceptance is not too different from other seasons, so don't worry too much. In addition to choosing a formal decoration company for protection, Huang Shiming, manager of the engineering department of Dongyi Risheng Decoration Co., pointed out that water circuits, wall surfaces, ceilings, paints, wood and wood flooring have become the key projects for acceptance. There is a clear provision that can be obtained from the decoration company. At the same time, the owner has mastered these tips and can make acceptance more prepared and easy to deal with.
Acceptance of water supply and drainage pipelines 1. The arrangement of pipelines should meet the design requirements. The installation of pipelines should be fixed firmly without looseness. The faucet and valves should be installed smoothly, with flexible opening, smooth water outlet, and normal operation of the water meter. Acceptance by visual inspection and feel.
2. There should be no leakage at the joints between pipelines and appliances, pipelines and pipelines. Using the method of passing water, visually and feel the method to check for leakage.
3, the installation of water pipes shall not be close to the power supply, and the spacing between the water pipes and gas pipes shall not be less than 50mm. Check with a steel tape measure.
Electrical acceptance 1. After completion of the project, the owner shall be provided with the dimension drawing of the line going to the site and shall be checked and accepted one by one according to the above requirements. The concealed electrical line shall be concealed after the acceptance of the owner.
2. The position of the live wire and the neutral wire facing the power socket is the right flame left-zero, and the socket with the grounding hole should be the upper position of the ground wire socket, and the grounding should be reliable. The switch socket should be firmly installed. Visual inspection and manual methods are used to check and special tools for circuit testing are used to verify that the positions of the live, neutral and ground wires on the socket meet the requirements.
Inlaying and Accepting Tiles Acceptance 1. Wall surface inlay should be firm, surface smooth and clean, no leaks are posted wrongly; gaps are evenly distributed around the perimeter, brick surface is not cracked, drop angles, lack of edges, etc., can be measured visually under natural light Method acceptance.
2, with a small hammer gently tap on the wall to see if there is emptying phenomenon.
Wood products acceptance closet and hanging cabinet shape, structure and installation location should meet the design requirements. The framework should use a hoe structure (except blockboard). The surface should be smooth, there should be no burrs and hammer marks, when using veneer material, it should be flat and firm, no degumming, no corners at the corners. Cabinet doors should be securely installed, with flexible switches, and parallel to the lower port and the lower port of the film. The hardware is fully installed, firm, and in the correct position. It is checked by visual inspection and feel.
Wood floor acceptance
The surface of the wooden floor should be clean and free from staining, planing and polishing, no planing marks, planing defects and burrs. The wooden grille should be firm, the spacing should meet the requirements, the laying should be firm, not loose, and the floor without noise when walking. Between the floor and the wall should be left between 8mm and 10mm expansion joints, visual inspection and feel the acceptance method.
Ceiling ceiling inspection installation should be solid, smooth surface, no pollution, cracks, missing edges, falling angle, hammer injury and other defects. Paste the fixed cover panel should not have delamination; cover panel should not have leakage, penetration, tilt angle and so on.
The position of the suspended ceiling should be accurate. All connecting pieces must be tightened and clamped firmly. The main keel has no obvious bending, and there is no obvious misalignment at the sub keel joint. The use of wooden ceilings, wooden keels should be fire-proof, in the installation of lamps and other objects in the location of fire prevention. 
The annealing of bare wire (wire which has simply been drawn) can be carried out in batches (bell-type furnace) or in line (in-line furnace).
Annealing is intended to return to the wire its ductility which it had lost during drawing.
Annealed wire is stored in coils or spools of a varying weights and dimensions depending on the purposes for which it is intended and the needs of clients. The product does not usually have any type of protective lining, paper or plastic. We offer two kinds of annealed wire, bright annealed and black annealed wire. Black annealed wire gets its name from its plain black color.
Soft annealed wire offers excellent flexibility and softness through the process of oxygen free annealing.
Uses: Black annealed wire is mainly processed into coil wire, spool wire or big package wire. Or further straightened and cut into cut wire and U type wire. Annealed wire is used as tie wire or baling wire in building, parks and daily binding.
Packing: Spools, coils.
Six major standards for acceptance of new houses
Moving into a new home is not a big deal. There are many nuances that need to be taken care of. If you want to move in easily, you must also practice a variety of "Kung Fu."