Aisle ceiling living room ceiling aluminum alloy glass interior decoration home decoration space craft glass ceiling fan light bathroom ceiling material bathroom design bathroom ceiling bathroom size
Common rail tools are specially for common rail injection system repair, it covers disassembly and assembly tools, measuring device, adaptors for different injectors, grinding machine, cleaning machine etc.
These tools meet different maintenance applications, are easy to use, and greatly improve maintenance efficiency.
Common Rail Tools,Common Rail Injector Tools,Common Rail Injector Removal Tool,Rail Pressure Tester CHENGDU UNICO MACHINERY CO., LTD , https://www.injectortestbench.com
Decorations that endanger the safety of our heads are generally ceilings, lamps, ceiling fans, Yuba, and various indoor hanging glasses. Due to the large area and mass of the ceiling, the damage caused by the ceiling is relatively serious.
1, wooden keel ceiling
The safety of the suspended ceiling depends mainly on its keel. Most families nowadays are suitable for making wooden keels without twisting red and white pine wood, and do not use softer yellow pine wood. The main keel size is 50mm*70mm; the secondary keel size is 50mm*50mm or 40mm*60mm; the boom is made of 4mm steel bars. With the guarantee of materials, the keel can be strong.
Do remember to call your construction team for fireproofing, anticorrosion, and anti-mite treatment of wooden keels.
When the side keel is made, it should be designed according to the design elevation line and fixed on the four sides of the wall. The secondary keel is to be fixed on the main keel with a nail. The sub keel on both sides of the main keel should be installed in a wrong position. The keel of the card grade should be installed between the two sub keels according to the block size and seam of the cover panel. Sub-keel spacing, generally 400-500mm. The spacing is too small to waste material, too large keel structure is unstable, easy deformation and shedding.
After the ceiling is installed, it is necessary to fully correct the position and level of the main gear, the position of the card gear keel, and tighten the boom after the correction. Good keel should be firm, reliable, and the horizontal deviation must not exceed 5mm.
539) {this.resized=true; this.width=539;}" border=0 resized="true">
2, aluminum alloy keel ceiling
If you are concerned that the wood keel is not easy to use for fireproofing and dampening and the aluminum alloy keel is used, the installation should meet the following requirements:
The main keel lifting point spacing requirements and the front wood keel requirements are the same, the distance from the main keel end of the boom should not exceed 300mm, more than adapted to add a suspender. When the boom and the electrical equipment meet, the structure of the hoisting point should be adjusted or additional booms should be installed to ensure the ceiling quality.
If your bathroom area is small, you can fix the side keel to the surrounding wall according to the height of the bullet line, and then fix the sub keel to the side keel with the connector. The condition is that after the sub keel is connected with the side keel of the aluminum alloy, the tension and straightness shall be achieved, and a boom may be added when necessary. However, it is still necessary to use booms for large areas of space and not to cut corners.
Finally, the position and level of the primary and secondary keels are completely corrected. The connectors should be installed in a wrong position.
Second, pay attention to the installation of lamps
The safety of lamps and lanterns is mainly due to installation. Some construction teams plan to save time. Some large ceiling lamps and chandeliers are directly installed on the ceiling of the ceiling. The weight of the ceiling should generally not exceed 3 kg. The correct method is to top the wall. Face hole installation hook. At the same time, the installation must also pay attention to, can not use ordinary cement nails, to use expansion screws to fix, is what we commonly known as "the United States fixed nails", ordinary nails can not grasp the lamp off, ceiling fans and decorative hanging glass The same is true for installation. Lamps less than 3 kilograms can be mounted directly on the keel. If the number is larger, pay attention to distribution. Uneven intervals will cause the ceiling not to affect the appearance. Over-concentration can also cause partial cracking and falling off of ceilings.
539) {this.resized=true; this.width=539;}" border=0>
The most easily overlooked area may be the bathroom. The ceiling area of ​​the bathroom is generally small. Many construction teams do not need to use a suspender structure to make ceilings. They are only fixed on the sides of the keel, so that the lamps in the center of the ceiling will not be supported. It is easy to remove the lamp with the top. It is advisable to use light fixtures that are as simple as possible in the bathroom.
Third, pay attention to the installation of Yuba
Due to the non-standard operation of the construction team, bathroom heaters in many bathrooms are directly fixed on the ceiling. This is unscientific. When the bathroom heater works, it may bring resonance to the suspended ceiling. Day after day, it is a hidden danger for those who are showering. The correct method is to directly fix the bathroom heater on the ceiling keel. The process will be a little more complicated, but it will be a safe shower environment
Home decoration please pay attention to head security (Photos)
First, pay attention to ceiling installation