The Ceiling Fan Light is beautiful in appearance, equipped with durable fan blades and lighting of different colors and styles, and has functions such as lighting, cooling, and decoration.There are much more Led Ceiling Fan styles in our website,such as DC Ceiling Fan ,Iron ceiling fan,Wooden Blades Ceiling Fan With Bulbs,Retractable Ceiling Fan Light,Simple Ceiling Fan Lamp,and best decoration Plywood Led Ceiling Fan.And there are more items are not showing on the website,please feel free to contact us directly for more information. Ceiling Fan,Ceiling Fan Modern,Ceiling Fan With Led Light,ABS Blade Ceiling Fan,Led Ceiling Fan JIANGMEN ESCLIGHTING TECHNOLOGY LIMITED , https://www.jmesclightingfan.com
Centrifugal pump before starting what needs to be done?
(1) Pre-start preparation a. Check the name, model, main performance and filling number of the lubricating oil before starting whether the requirements of technical documents are met; whether the bearing lubrication system, sealing system and cooling system are intact, Whether the waterway is smooth; circling the pump rotor 1 ~ 2 turn, check the rotor for friction or stuck phenomenon; in the vicinity of the coupling or belt guard, etc., whether there is interference with rotation of debris; pumps, housings, motors Of the foundation anchor bolts are loose; pump working system valves or ancillary devices should be in the pump load minimum position, the outlet valve should be closed; point pump to see whether the impeller steering steering with the design, if inconsistent, Impeller must be completely stopped turning, adjust the motor wiring, before starting again. b. Filling the water pump Prior to start-up, the pump housing and suction pipe must be filled with water, because of the presence of air, the suction port vacuum can not be formed and maintained. c. Warm pumps Pumps that deliver hot liquids, such as boiler feed pumps in power plants, must be warmed up before starting. This is because when the feed water pump is started, the high-temperature feed water flows through the pump, causing the temperature of the pump body to rise quickly from room temperature to 100-200 ° C, which causes the temperature difference between the inside and outside of the pump and between the components. If there is not enough Heat transfer time and appropriate measures to control the temperature rise will cause uneven expansion of the pump around, resulting in deformation of the various parts of the pump, wear, vibration and axle suspension accidents.