Mastergrip Laser Distance Meter
Product Description:
A laser distance measure is an advanced measuring tool to measure any distance without any efforts. It has a laser beam that is produced by the meter with the help of a battery and reflects it through a lens. The meter can measure the distance covered by the leaser and the result is shown on the display. Mastergrip laser distance meter is a digital distance measuring tool for precise and effortless measurement taking. It is an ideal measuring device for contractors, insurance adjusters, architects, flooring professionals and other people who do a lot of measuring. However, homeowners can easily use laser tape measures around the house, too.
User instruction:
Place the device on one end of what you want to measure, and then aim the laser beam so that it hits an object at the other end..If there's no wall, pole or anything like that, put a target at the spot you want to measure up to. The process is similar to using a conventional tape measure, except you use a laser beam instead of metal tape. Once you have the laser at the right spot, press the button, and the tape measure calculates the distance and displays it on its screen. The calculation is done through precision optics and laser physics using the phase-shift method, in which a laser hits an object and compares its reflection with the beam sent out, or using the time-of-flight method in which the time it takes for an optical pulse to reflect back is calculated. Some laser tape measures let you measure multiple distances and add them together automatically.
Specification:
Brand
WINTAPE or customized
Material
Metal case
Size
L 120mm * W 60mm * D 29mm
Measurement Accuracy
+/-1.5mm
Measurement Range
0.03-100m
Smallest unit display
1mm
Laser switched off automatically
15 seconds
Device switched off automatically
360 seconds
Laser type
Class2,635 mm,<1mW
Water-proof and dust-proof grade
IP54
Unit conversion
meter / inch / feet
Operating temperature
0 ºC to +40 ºC (32ºF to 104ºF)
Storage temperature
-10ºC to +50ºC (14ºF to 122ºF)
Battery powered
1.5V*2 pieces AAA type (R03 / LR03)
Battery life
> 5000 times
Weight (approx.)
110 g (without battery)
Security
EN-71,RoHS, 6P
Packing
1pcs/box+inner box, 50pcs/carton, Carton size:53*25*31cm
NW/GW:9/10kgs
Payment Terms
T/T( Paypal, Bank Transfer), Western Union
Shipping
By Sea, Air, Express
Measurement accuracy: +/-1.5mm
Measurement range: 0.03-100m
Smallest unit displayed: 1mm
Single measurement time: 0.1-3 seconds
Measuring unit: m/ft/in
Laser grade: Class II
Laser Type:635nm, ＜1mW
Inclinometer: 0/90 degree
Continuous distance measurement: Supported
Area/volume/pythagorean measure: Supported
Min and max measurement value: Supported
Measuring reference switch: Supported
Display illumination: Supported
Battery type: AAA size alkaline battery 1.5V*2
Water-proof and dust-proof grade: IP54
Operating temperature: 0℃-40℃
Storage temperature: -20℃-60℃
Laser switched off automatically: 15 seconds
Device switched off automatically: 360 seconds
Dimensions: 117*50*26mm
40M Laser Measure,Handheld Digital Distance Meter Measure,Digital Distance Meter Measure Wintape Measuring Tape Company , https://www.wintapetape.com
The A350XWB widebody aircraft project is the first project to combine the keel beam and the rear lower shell into a single important component. This huge keel beam is 70% made of composite material and is 16.5 meters long, 4.3 meters wide and weighs 1.2 tons. It is assembled from 10,000 fasteners and 2000 parts. The keel beam makes the fuselage more structurally consistent at the landing gear.
Airbus Nantes Factory delivers the first A350XWB composite keel beam
Following the delivery of the first A350XWB central wing box to the Airbus’s Saint-Nazaire plant on August 8, the Airbus Nantes factory delivered another important A350XWB part, the A350XWB keel beam. The special transporter carrying the keel beam is more than 25 meters long and runs from the Nantes factory to the Loire River and is then transported by barge to the Airbus’s Saint-Nazaire plant.