Carpentry acceptance notice

1 Look at the gap: it is not more than 0.2mm for the wood sealing line, corner line, and waistline facing plate, and the angle between the line and the line mouth is not more than 0.3mm, and the interface between the veneer and the plate does not exceed 0.2mm, and the entire sliding door is The error does not exceed 0.3mm.

2 Look at the structure: if the structure is straight. Whether horizontal or vertical, the correct carpentry practices should be straight.

3 Look at the corner: if the corner is accurate. The normal corners are all 90 degrees, except for special design factors.

4 Look at the parquet: whether the parquet is tight and accurate. The correct wooden pattern is to be seamless or to maintain a uniform distance.

5 See arc: whether arc and roundness are smooth and sleek. In addition to a single, a number of the same shape to ensure consistency in the shape.

6 Look at the door: Is the cabinet door switch normal? When the door is open, it should be light and no noise.

7 Look at the leveling: The surface of the woodworking project should be smooth, without drums or breakage.

8 Look at symmetry: Symmetric woodwork items are symmetrical.

Woodworking knowledge carpentry acceptance villa design switch cabinet door

Clamp Grow Light

We have many models clamp Led Plant Light, 1/2/3/4 head, circle model, bar model, and another model clamp Full Spectrum Led Lights. Easy installed, you can clip on everythere, works well for home depot, vegetables, hydroponic growth.

Led Grow Lights Commercial,Indoor Clamp Grow Light,Outdoor Plants Clamp Grow Light,Led Greenhouse Grow Light

Shenzhen Wenyi Lighting Technology Co., Ltd , https://www.wygrows.com