Housekeeping Tips

Recommended closing date: It is recommended that you go to the house on the third or fourth day to take the tool:
a) 1 plastic washbasin - for acceptance of the water pipeline b) 1 small hammer - for acceptance of the house wall and the ground is empty drum c) 1 feeler gauge - used to measure the width of the crack d) 1 Only 5 meters tape measure - used to measure the house's net height e) 1 multimeter - used to test whether the various power sockets and weak currents are free flow f) 1 calculator - used to calculate data g) 1 only Pen - for signature h) 1 broom - for cleaning the interior hygiene i) 1 stool and some newspapers, plastic tape, packing rope - for a long time, you can take a break and pre-close the sewage pipeline.
Acceptance of the house: Generally lasting 2-3 hours, it is recommended to go to 8:30 in the morning or 2:30 in the afternoon.
Housekeeping process:
1) To go to the property department to view the data section, there are the following pieces of information to check:
A. The "Residential Quality Assurance Certificate" of the house - can take away B, "House Use Manual" - can take away C, "Completion Acceptance Record Form" D, area measurement form E, pipeline distribution as-built drawing (water, strong electricity) , weak electricity, structure) - can take away If the developer is fully prepared, usually 10 minutes to finish the data.
2) Verify that the area, contract, and price are more than compensated for.

Home inspection house residential outlet house

Valves

Valves are found in virtually every industrial process, including water and sewage processing, mining, power generation, processing of oil, gas and petroleum, food manufacturing, chemical and plastic manufacturing and many other fields.

People in developed nations use valves in their daily lives, including plumbing valves, such as taps for tap water, gas control valves on cookers, small valves fitted to washing machines and dishwashers, safety devices fitted to hot water systems, and poppet valves in car engines.

In nature there are valves, for example one-way valves in veins controlling the blood circulation, and heart valves controlling the flow of blood in the chambers of the heart and maintaining the correct pumping action.

Valves may be operated manually, either by a handle, lever, pedal or wheel. Valves may also be automatic, driven by changes in pressure, temperature, or flow. These changes may act upon a diaphragm or a piston which in turn activates the valve, examples of this type of valve found commonly are safety valves fitted to hot water systems or boilers.

More complex control systems using valves requiring automatic control based on an external input (i.e., regulating flow through a pipe to a changing set point) require an actuator. An actuator will stroke the valve depending on its input and set-up, allowing the valve to be positioned accurately, and allowing control over a variety of requirements.

Stop Valves, Ball Cock, Angle Valves, Gate Valves, Check Valves

ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsirvalves.com