Most of the families now use aluminum alloy doors and windows. This door and window itself is a kind of superior performance, beautiful and generous products, the most important is that this product is also more convenient to install, it is because of these reasons so it is well received by users. Like it. The following Xiao Bian will introduce you to aluminum alloy door and window installation skills and explain these steps to teach you to quickly install. 1, positioning, pay-off line: First of all, in the installation of fixed glass and moving glass door leaf combined with the glass to carry out the positioning of the line, it can be said that this step is also the installation of aluminum doors and windows tips, and at the same time when you are installing according to The design and construction drawings are required to be done and the positioning line of the glass door is released so that the position of the door frame can be well determined and the elevation of the floor and the height of the door frame and the height of the middle cross box can be accurately measured. 2, the top limit slot size: limit slot width is generally greater than the glass thickness of 2-4mm, groove depth is about 10-20mm. In this step, the aluminum alloy doors and windows are to be installed with two metal decorative plate edges. Then, when the installation is performed, the limit slots at the top of the door frame can be used. 3, the metal veneer of the wooden tray: first of all to the square wood fixed to the ground, the next step is to use adhesive to glue the metal veneer on the wood, you can use wood directly nailed to the embedded brick, or It can be fixed by crash bolting. 4. Install the vertical door frame: Connect the centerline of the bullet to the door and frame the square wood. At this time, you can use the plywood to determine the shape and position of the sill post, and finally use the outer metal decorative surface. It can be said that this step is also to place the trim facing the seams of the head on the center of both sides of the mounting glass when wrapping the trim. 5, the installation of aluminum alloy doors and windows in place: must be based on the planed doors and windows to locate it, install aluminum alloy door and window frames, but also to adjust it in a timely manner, the horizontal and vertical and diagonal length of the door and window frame Meet quality standards, then use a wooden wedge to temporarily fix it. 6, fixed: This step is also more important, that is, the aluminum alloy doors and windows embedded with iron can be directly to the aluminum alloy doors and windows of the iron directly with the embedded iron on the wall, so that at the time of welding It is necessary to do anti-rust treatment; if there is no iron, then you can use metal expansion bolts or plastic expansion bolts to fix it. 7. Treatment of cracks between door and window frames and walls: The installation of aluminum alloy doors and windows is based on the fact that aluminum alloy doors and windows are also a concealed project after installation and fixation. Therefore, special attention must be paid to the acceptance of it. Summary: About the installation of aluminum alloy doors and windows to explain and these steps to teach you to quickly install the relevant content is introduced to this, you only need to follow these steps to install the installation, you can say that the installation of the doors and windows will not be much problem, And it is also more beautiful. Laminated Grade Titanium Dioxide Titanium Dioxide Tio2,Industrial Grade Titanium Dioxide ,Titanium Dioxide Rutile Tio2 588,Laminated Grade Titanium Dioxide Yibin Tianyuan Group , https://www.ybtyco.com
Aluminum alloy door and window installation skills to explain these steps to teach you to quickly install