[China Aluminum Network] In recent years, the state has successively introduced strict and strict policies on sewage treatment, and the polyaluminum chloride market is also extremely lively. Relevant data show that at present, more than 70% of the country's water purification materials are occupied by polyaluminum chloride, and the policy factors have a great influence on the market price of high-efficiency alkaline polyaluminum chloride. The price of so-called high-efficiency alkali-type polyaluminum chloride is affected by the national policy. It is nothing more than the state to adopt some measures for macro-control, such as the government’s efforts to develop polyaluminum chloride in place of traditional aluminum salt water purifying agent in tap water. High-performance alkali-type polyaluminum chloride subsidizes, indirectly reducing the PAC's ex-factory price. Sometimes, the government will regulate the use of some raw materials such as bauxite, which will cause market prices of polyaluminum chloride to fluctuate. In addition, some of the government’s short-term policies will also affect the market prices of PACs, such as the “Water Ten,†“The Ten Atmospheres,†and a series of important activities such as the preparation for the Winter Olympics in 2022. During this period, the government will enact laws and regulations to stop the production activities of some manufacturers in some regions, which will affect the changes in market supply and demand. At the same time, changes in traffic laws will also result in higher transportation costs, which will increase the prices of PAC venues. As one of the more commonly used water treatment agents, high-efficiency alkali-type polyaluminum chloride has a very mature production technology and is comparable to internationally advanced technologies. However, the price of domestically produced high-efficiency alkali-type polyaluminum chloride is much lower than that of imported polyaluminum chloride. The main reason is that China has a very rich source of high-efficiency alkali-type polyaluminum chloride production, and the price is low. It is also because the size of the domestic polyaluminium chloride manufacturers is relatively small, and there are obvious regional characteristics, which is related to the convenience of raw material extraction of high-efficiency basic polyaluminum chloride. At present, there are more than 1,000 manufacturers of polyaluminum chloride in the country and the production technology is very mature. China's high-efficiency alkaline polyaluminum chloride is mainly used in the fields of industrial sewage and tap water purification. The consumption of these two areas accounts for about 70% of the total consumption. The proportion of use in industrial wastewater purification accounts for more than 40%; the ratio of tap water purification and domestic sewage treatment is about 30%; the industrial circulation water and river reservoir purification account for 20%; the others account for 10%. Although the market price of high-efficiency alkali-type polyaluminum chloride will be affected by the relevant national policies, the majority of water purifying agent producers should also realize that the market price of PAC will also be affected by other factors, such as cost factors and market factors. , technical quality factors, etc.
Ningbo Actmix produces a group of environmental-friendly Rubber additives & chemicals. As special accelerator for EPDM and other synthetic rubber compound, does not contain any secondary amines which can form nitrosamines during vulcanization; and with excellent performance and dispersion. These chemicals included Actmix®Phosphorodithioic range, Actmix®CLD-80, Actmix®Retarder E-80, Actmix®TBzTD-70, Actmix®ZBEC-70 etc.
Actmix®Pre-dispersed rubber chemicals, impurity free, blocked filter free of extrusive products, scrap rate reduction and higher productivity thanks to filtration.Wider compatibility with other elastomers.
These chemicals are widely used for automotive rubber sealing system, sealing strip, rubber hose etc technical parts.
Environmental-friendly Rubber Chemical Environmental-friendly Rubber Chemical,Environmental-friendly Elastic Rubber,Environmental Life Casting Silicone Rubber,Environmental-friendly Rubber Getting Raw Oil Ningbo Actmix Rubber Chemicals Co., Ltd. , http://www.actmixchemicals.com
Why do we say that the price of China's high-efficiency alkaline polyaluminum chloride is low?