Pull Rivet Nuts , pull cap, instant pull cap, the fastening field, currently widely used in automobile, aviation, instrument, furniture, decoration and other electrical and light industrial products on the assembly. In order to solve the defects of metal thin plate and thin pipe welding nut, such as easy melting, easy sliding tooth of tapping internal thread and so on, it does not need tapping internal thread, does not need welding nut, riveting firm efficiency is high, easy to use.
Hebei Xinyu Metal Products Co.,Ltd is a ISO9001-2008 cerificated enterprise,which specialize in manufacturing and exporting Furniture Nuts .Product including Wing Nuts , Hopper Feed T Nuts , Propeller Nuts , Weld Nuts , Pallet Nuts , Locking Nuts , Rivet Nuts , Doggie Tooth Washers , Steel Stamped Parts , Hopper Feed Rivet T Nuts , Metal Stamped Parts ,T-Nuts For Cliff-Climbing,Furniture Nuts, Tee Nut For Rock Climbing holding, Insert Tee Nut ,Middle steel Zinc Plated Stamping Wing Nut, Auto Flat Plane Weld Nuts ,Automobile Spot Welding Nut,Customer-Made Metal Stamping Parts, Cold Heading Tee Nuts ,Stainless Steel Butterfly Nuts, Furniture Eccentric Wheel , Cam Lock Furniture Nut .
Pull Rivet Nuts Rivet Nut,Pull Rivet Nuts,Carbon Steel Rivet Nut,Stainless Steel Rivet Nut,Rivet Nut For Wood,Wooden Furniture Rivet Nut,Flat Head Rivet Nut,Round head Rivet Nut Hebei Xinyu Metal Products Co.,Ltd , https://www.t-nuts.net
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>Basic additional dynamic load by temperature correction Correcting the bearing by the temperature, the additional dynamic load
We have now said how to select bearings based on the fundamental extra dynamic load; when using rolling bearings at high temperatures; the bearing hardness decreases; the fatigue life is reduced compared to the normal temperature. Therefore, the fundamental additional dynamic load should be estimated to be smaller. Make a change. /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
Ct=ft0鸆:
Ct: the fundamental extra dynamic load (N) modified according to the operating temperature; (kgf)
Ft: temperature coefficient; (125 degrees; coefficient is 1,150 degrees; coefficient is 1,175 degrees; coefficient is 0.95,200 degrees; coefficient is 0. 90,250 degrees; coefficient is 0.75)
C: fundamental extra dynamic load (N); (kgf)
Pay attention to; when using bearings at high temperatures above 120 degrees; the scale of large bearings changes greatly; therefore; to achieve dimensional stability and disposal; otherwise; the fundamental additional dynamic load of bearings for over-scale stability; sometimes lower than bearings The fundamental extra dynamic load recorded in the scale table.
Recommend to friends comments close window Bearing related knowledge INA pressure bearing fine instrument bearing layout and brake valve failure reason analysis of bearing tumbling body heat treatment process analysis
The deep grinding method of SKF bearing processing skills is aimed at the inner packaging method requirements of different types of bearings.
This article links to http://
Please indicate China Bearing Network http://
Previous: Equipment for tapered bore bearings Next: Application of bearings (1)
Type editor
Small hexagon Stainless Steel Rivet Nut with through hole and small hexagon stainless steel Rivet Nut with blind hole.
Use the editor
If the nut of a product needs to be installed on the outside, and the internal space is too small to allow the pressure head of the riveter to enter the process of riveting and the sprouting method can not meet the strength requirements
Pull rivet nut
Pull rivet nut
Wait, at this time pressure riveting and full riveting are not feasible. Must be riveted with a pull. Applicable to the fastening field of all thickness plates and pipes (0.5mm-6mm). Use pneumatic or hand pull riveting gun can be riveted once, convenient and firm; Replace the traditional welding nut, make up for the lack of metal sheet, thin tube welding melting, welding nut not good.
Our key strength are custom made special fasteners according to drawing or sample .We have longer and stable business relationship with well-known companies from American, Poland,Germany,French and so on.In the future ,xinyu will continue focusing on innovation special designed products,becoming your most trusted partner.
Correcting the bearing by the temperature, the additional dynamic load
Source: Bearing network time: 2014-09-11