The wallpaper adds a chic color and home atmosphere to the home. It is rich in color, diverse in shape and easy to replace. It is an essential material for home soft decoration. After the decoration of the wallpaper, pay special attention to its maintenance work. So what should be done specifically, so that the beauty brought by the wallpaper is still in the home? General high quality PVC rubber surface material, non-toxic plasticizer, formaldehyde-free radiation, flame retardant, fire resistant, chemical resistant. When cleaning the PCV rubber surface, use a clean water scrub or a colorless clean wet towel to gently wipe. If there is obvious stain, it can not be removed and then wiped with a neutral cleaning solution. When the temperature is low, the PVC wallpaper can be washed with some warm water, and the heat will decompose and remove the stain on the PVC surface. At higher temperatures, because the surface PVC molecules are more active, if the water is too much or the temperature is too high, it will accelerate the penetration of water into the bottom layer of the wallpaper. Therefore, it is not suitable to use warm water. Natural wallpapers include pure paper wallpapers and straw wallpapers. Pure paper wallpaper is not easy to curl, foam, no smell, high environmental performance, strong breathability; straw wallpaper is non-toxic and tasteless, sound-absorbing moisture, cool ventilation. The color of natural materials is mostly dyed by dyeing cylinders, so the color retention of the wallpaper is not high. If the wallpaper is cleaned with water, there will be obvious discoloration. It is recommended to use dry towels or feather duster to clean the wallpaper. There are two types of pure paper wallpaper: native wood pulp paper and recycled wood pulp paper. The original wood pulp paper ------ relatively good toughness, the surface is relatively smooth, and the weight of the single square meter is relatively heavy. The toughness of the recycled paper is weaker than that of the recycled paper, and the surface is mostly foamed or semi-foamed. The paper's water resistance is weak compared to that of the paper. It is best not to spill the glue on the surface during construction. If it is accidentally spilled, do not wipe it. Use a clean sponge or towel to test. If you use pure starch glue, you can also use a brush to lightly brush after the glue is completely dry.
Kylin Chemicals has been focusing on R&D, manufacturing and supply of specialty additive technologies to epoxy resin industry for over 20 years. Our novel technologies are marketed & supplied under the trade name KylinCure, serving our customers in the field of composites, coatings, adhesives and electric industries, etc. KylinCure is a group of substituted urea based accelerator for dicyandiamide-cured epoxy resins, significantly reduces the curing temperature without sacrificing the shelf life of the compounds.
Epoxy Curing Agents & Accelerators Epoxy Curing Agents & Accelerators,Curing Agents For Epoxy Resin,Epoxy Curing Accelerating Agent Kylin Chemicals Co., Ltd. , http://www.kylin-chemicals.com
Wallpaper maintenance knowledge summary