Wood lacquer acceptance is a project that should be focused on at home acceptance. According to certain standards and methods, the paint surface of wooden furniture is inspected, and problems are found in time for rectification. Since the wood lacquer brushing mainly has two kinds of transparent lacquer wood grain effect and color lacquer effect, depending on the effect, the acceptance is also slightly different. Let's take a look at some of the points when wood paint is accepted. 1, the paint surface is clear This is for the wood products that make the wood paint transparent effect. After the transparent wooden furniture is painted, the grain of the wood is not covered, and the natural texture of the wood can be revealed. For owners who require wood grain effect, when checking the wood paint surface, it is necessary to check whether the grain surface of the wood is clear, whether the brown eye is flat, and whether some other defects on the wood are well covered. 2, the paint color is uniform and no color difference This is for the wood products that make the paint effect. After the lacquered wooden furniture is painted, the grain of the wood is shaded, showing the color of the lacquer. When the wood paint of the paint effect is inspected, it is necessary to check whether the paint surface is evenly colored, whether there is any inconsistency in the color depth, and the paint surface is required to have no brush pattern. 3, the paint surface is smooth and flat, saturated and full When accepting, you can touch the paint surface by hand to feel smooth and even thickness. The high-quality wood lacquer finish should be smooth and flat, free of rough and granules, and uniform in thickness. Also check whether the paint surface saturation and fullness are good. Look at the gloss of the lacquer and carefully observe if the reflection is uniform. 4, the paint surface is free of whitish, granules, pinholes, cracks and other defects Due to improper construction of the wood lacquer, various problems may occur in the lacquer surface. For example, the size of the particles on the surface of the paint film; the color is whiter than the original, it is white mist; small holes such as needle-like size appear; cracks appear on the surface. Pay special attention to the existence of these more serious problems when accepting. 5, the side, the bottom and other brushless coating is not in place When the wood lacquer is accepted, many people may pay attention to the effect and quality of the wood lacquer on the furniture surface, and often overlook the side of the furniture, the back, the inside, the bottom and the like where it is easy to apply. Therefore, we must pay attention to this when accepting. If the bottom surface is not visible, it can be observed by the reflection of the mirror. 6, check whether the decorative line, color separation line is straight When making furniture with mixed colors, when checking the wood paint, pay attention to check whether the decorative line and the color separation line are straight. Qualified wood lacquer The two-color paint junction is straight and straight, showing a vertical line with almost no deviation. The color separation line between the two colors is curved and twisted, which is extremely unattractive and unqualified. When checking, it can be measured with a pull wire, and the error should not exceed 1 mm. 7. Check if the hardware adjacent to the wood is clean. When the wood lacquer is applied, if the hardware, glass, wall, floor, etc. adjacent to the wood are not protected, these objects and parts are easily contaminated. Therefore, in the inspection, in addition to checking the wood itself, it is also necessary to check whether the objects and parts adjacent to the wood are clean and contaminated with paint.
The Pvc Lay Flat Hose is primarily used in the agricultural/irrigation industry, it is one of the highest quality PVC lay flat hoses you will find available anywhere.Our lay flat hoses applications include: Irrigation, Pool Discharge, Water Discharge
Strong & lightweight, Maintenance free.Resists kinking & twisting,continuous high tensile strength polyester fiber circularly woven throughout to provide einforcement .High pressure lay flat hoses rolls are easy storage & transport.Perfect for use with water, light chemicals, agricultural, irrigation, & construction fluids.We provide different kind of working pressure for the customer different delivery fields.Heavy duty ,medium duty and low duty layflat hoses.Ideally suited for use in pool & other general open end water discharge applications.The popular color for lay flat hose is blue,green,red and yellow,which can be coupled with aluminum or malleable shank connectors or quick connects.Specifically designed for low to medium pressure applications for the discharge of water & light chemicals.
Pvc Lay Flat Hose,Flat Frac Hose,Farm Irrigation Lay Flat Hose,Pvc Layflat Hose Hebei Jiuxing Rubber&Plastic Product Co., Ltd. , http://www.jxrubberhose.com
Wood lacquer acceptance points
Jc001.load('iframe') JIFrame.create({ 'url' : '/go.php?action=ads&iframeHeight=250&isIframe=1&key=%D3%CD%C6%E1&pos_id=jc001_news_detail_30&reqkey=1&style=margin%3A15px+15px+ 25px+0%3B+height%3A255px%3Bwidth%3A255px%3B+float%3Aleft%3B', 'height' : 250 })