As the most basic and most commonly used function in CAD, the correct use of the layer will greatly improve the drawing efficiency of engineers. It can be said that the definition of the layer is the most critical setting of the entire Zhongwang CAD software. The following is a brief introduction to the description and use of the Zhongwang CAD layer. The properties of the layer in Zhongwang CAD mainly include name, color, line type, line width, and print style. Its operation is mainly to classify, display, freeze, and lock the layers. As shown below: When we set the layer, we must define the corresponding color, line shape, and line width. The color definition of the layer should pay attention to two points. First, different layers generally use different colors. In doing so, we can distinguish between colors clearly when we draw pictures. If the two layers are the same color, it is difficult to judge which layer the object being operated on is displayed; the second point of the layer color definition is that the color should be selected according to the thickness of the line width at the time of printing. Come choose. When printing, the wider the line setting, the brighter the layer should be. The following picture shows the display and effect of a drawing layer. For the use of layer 0, many designers prefer to plot on layer 0, layer 0 is the default layer, and white is the default color of layer 0. Therefore, the drawings sometimes look like a white flower on the display. This is absolutely not desirable, and it is easy to cause confusion when performing large-scale operations. When setting up the layer, there are mainly some places to pay attention to in the above aspects. In addition, when drawing, there is one more thing to note, that is, all the properties of all objects should go as far as possible with the layers. A perfect drawing not only requires good design software, but also requires engineers to have good habits. Aluminum Sheet,Brushed Aluminum Sheet,Aluminum Sheet for Floor Xingqiu Aluminum Co., Ltd. , http://www.fsdoorsprofile.com
CAD drawing skills: the use of Zhongwang CAD layers