2. Next we want to draw the guiding curve, select the sketch, draw the guiding curve in the plane according to the curvature of the pipe bending and the radius at the center of the above figure. 3. The next thing to do is to sweep. Select standard sweep 4. Finally, the thickness of the pipe is set. Select the thickening in the offset setting of the option. Because the circle of the circle we draw at the beginning is drawn at the outermost radius, we should expand to the inside when selecting the thickness. The value entered by 1 is a negative number, and the offset 2 is not offset, and is set to 0. In addition, since the pipeline is connected, it is necessary to set the bottom to be open at both ends. The sweep of this surface is over, of course, the function of the 3D sweep is not limited to this. Here is just a very simple introduction, so that everyone has a preliminary view of the sweep function of Zhongwang 3D. Knowing that more functions require further research. Furniture Plywood,Plywood Furniture,Plywood Table,Plywood Cabinets LINYI JIUHENG IMPORT AND EXPORT CO.,LTD , https://www.jiuhengwood.com
Then select the addition operation in the dialog box that appears on the left side, select the circle drawn in step 1 as the contour, and the curve in step 2 as the path. 
Previous page 1 2 Next page
CAD Tutorial: Zhongwang 3D Standard Sweep Application (2)