Monel K-500 Nickel Alloy Pipe Stainless Steel Tube Nin/En 2.4375

Model NO.: K-500 EN 2.4375
Welded Pipe: Dn15mm~2600mm
Seamless Pipe: Od32*3.5mm~630*9mm
Length: as Customer′s Requirement
Brand: Baosteel,Tisco,Posco
MOQ: 1 Ton
Delivery Time: 7~15 Days
Shipment: EXW,Fob,CFR,CIF
Payment: T/T,L/C
Technique: Cold Rolled/Hot Rolled
Surface Treatment: 2b/Ba/No.1
Trademark: luyesteel
Transport Package: International Standard Export Packing
Specification: ASTM, EN, AISI, ASME, DIN, JIS, GB, ISO, SGS
Origin: Tianjin, China
HS Code: 721990000
Monel K-500 Alloy Steel Pipe and Tube UNS N05500 EN 2.4375

Monel K-500 is a precipitation-hardenable nickel-copper alloy, with excellent corrosion resistance characteristic of Monel 400, and with greater strength and hardness. When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength of alloy 400. The strength of this nickel steel alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F.
This nickel alloy is spark resistant and non-magnetic to -200° F. However, it is possible to develop a magnetic layer on the surface of the material during processing. Pickling or bright dipping in acid can remove this magnetic film and restore the non-magnetic properties.

Standard:
Monel K-500  UNS: No.N05500 DIN/EN:2.4375
 
Type Alloy steel pipe
Seamless pipe Φ32*3.5mm~Φ630*9mm
Welded pipe Dn15mm~2600mm
Thickness 0.2mm-60mm
Length 1000mm,2000mm,2440mm,3000mm,6000mm,6096mm,10feet,12m,etc
Finish NO. 1,2B
Standard ASME, ASTM, EN, BS, GB, DIN, JIS etc
Materials nickle alloy
Packing 1. woven bag  
2. wooden case

Characteristics: 
1. Good mechanical properties 
2. Yield tensile strength
3.Highly resistant to chloride and sulfide stress corrosion cracking
4. Resistant to aqueous corrosion and chloride ion stress corrosion cracking
5. High temperature resistant
6. Age-hardenable with a unique property of slow aging response that permits heating and cooling during annealing without the danger of cracking.
7. Excellent welding characteristics

Chemical composition
% Ni Cu Fe C Mn Si S Al Ti
min 63.0 27.0           2.30 0.35
max   33.0 2.0 0.18 1.5 0.50 0.010 3.15 0.85

Applications:
Sour-gas service applications
Oil and gas production safety lifts and valves
Oil-well tools and instruments like drill collars
Oil well industry
Doctor blades and scrapers
Chains, cables, springs, valve trim, fasteners for marine service
Pump shafts and impellers in marine service
 
Product Category Specification(mm) Grade
Heat-resisting Superalloy Anticorrosion Alloy Hot-rolled Bar   diameter (length of side) Φ10~85 , 30~85 FN-2,RA333, A-286,V-57,Inconel706, 
Incoloy901,Incoloy903, 
Incoloy907, HastelloyX,Inconel600, Inconel625,HastelloyC-4, HastelloyB,HastelloyC-276,Inconel718,R26,Nimonic80A,Nimonic90,Nimonic93,Nimonic105,Nimonic118,Rene41,InconelX-750,C263, 
U720Li,Waspalloy,Hastelloy188,Hayness-25,BAT-45Y,AHB-300,GMR-235D,B-1900,In100,Rene100,In713C,TRW-VIA,In738,X-40,Incoloy800,Incoloy800H,Incoloy825,Alloy 20cb3,Inconel 600,Inconel 690,Hastelloy B,Hastelloy B-2,Hastelloy C,C276,Hastelloy C-4,Inconel 625
Forged Bar diameter (length of side) Φ 90~250
Hot-rolled Sheet thickness×width×length 5.0~8.0×650~700×1000~2000
Cold-rolled Sheet  thickness×width×length 0.8~4.0×700~1000×400~2000
Cold-drawn -Steel  diameter             hexagon length of side Φ8.0~35.0                     S 8.0~32.0
Forged Shaft diameter (length of side) Φ 200~450
Forged Disc  diameter (length of side) Φ500~1000×≥100
Forged Die Block  length of side mm 200~500
Precision Alloy Cold-rolled Strip thickness×width 0.03~3.0×≤300 Alloy1,AMS7717B,Alloy 3,Type 2,Alloy 4,Alloy 4,FeC
Hot-rolled Bar diameter (length of side)  21~55
Hot-rolled Flat Steel thickness×width  3.5~13×≤300, 8~20×≤450
Cold-drawing Wire diameter (length of side) 0.1~8.0

Packing: standard export packing, seaworthy packing, bundles, plastic bag, woven bag, wooden cases, plywood case, iron case, or as per customer require.

Our Advantages:
1. More than 200 patterns
2. Bottom price
3. Reliable quality and service
4. Fast delivery

We will reply you in 24 hours. Please remember check your inbox.
Welcome to inquiry. Looking forward to cooperating with you in the near future.

LED Therapy Light High Power

LED Therapy Light High Power, include 3 wattages, 300w 500w 1000w, 300w with 50pcs led, 500w with 1000cs led, 1000w with 200pcs led.

Why use led therapy light?

Red light therapy is a skin care treatment being offered as an alternative to physician-administered laser therapy.

Nost studies is involving red light therapy revolve around the treatment of acne, and of its ability ti get rid of wrinkle, while research is not yet conclusive on the benefits of red light therapy, studies suggest that concentrated red light is absorbed y the mitochondria in the cells and stimulates the generation of more collagen.



Red Light Therapy ,Rechargeable Led Face Light,Led Therapy Light,Red Light Infrared Full Body

Shenzhen Wenyi Lighting Technology Co., Ltd , https://www.szwygrow.com