The safety protection system includes various mechanical and electrical protections. The five major components include: safety gear, speed limiter, door lock, buffer, rope gripper and uplink overspeed protection. In order to effectively avoid frequent elevator accidents, we should do a good job in elevator safety devices and inspection, eliminate hidden dangers and ensure elevator safety. We are manufacturer of Elevator Safety Components in China, if you want to buy Elevator Safety Devices, Elevator Safety Components And Systems, Industrial Elevator Safety Parts, please contact us. Elevator Safety Components,Elevator Safety Devices,Elevator Safety Components And Systems,Industrial Elevator Safety Suzhou Stable Trade Co., Ltd , https://www.stable-elevator.com
Talking about the Development Status and Existing Problems of Large Vertical Drip Pump in China
ã€Abstract】 The development process of large-scale vertical diagonal flow pump in China, the structure type of large-scale inclined pump adopted in our country, the existing problems and the future development trend are briefly introduced. Key words vertical ramp pump performance model structure trend I. Introduction Vane pump impeller exit fluid flow direction can be divided into centrifugal pump (radial flow pump), mixed (oblique) flow pump and axial flow pump. Among them, the mixed flow pump with space guide vane is generally called diagonal flow pump. Vane pump development process is roughly centrifugal pump, axial pump, and then mixed flow pump. The first vane pump in the history of technology was a wooden drainage centrifugal pump used by the Portuguese of the 5th century AD at the Santo Domingo copper mine, which was found on July 31, 1772, in the National Museum of Paris, France. The pump impeller is fitted with double-curvature blades. The first modern modern pump for lifting liquids was manufactured by the French physicist Papan in 1705. In 1785, Ding Kesi announced a patent for a new pump, which is the prototype of an axial-flow pump. Mixed-flow pump made it clear that by the 1918 Grinney in the "water pump" a book, produced a mixed flow impeller Ellis spiral pump graphics (so mixed-flow pump, also known as spiral pump, but this is a misunderstanding The name). According to relevant records, in fact, in 1907, due to the development needs of low-lift pumps, centrifugal pumps have been partially replaced with mixed-flow pumps, diagonal pumps and axial-flow pumps in various industrialized countries and batch production has been carried out. Typically, people will be more than the speed ns in the range of 300 to 500 vane pump called oblique (mixed) flow pump. Some of its use and centrifugal pump and axial flow pump overlap, single-stage lift up to 60m, the flow rate from 20m3 / h to the maximum flow vane pump value, the type of pump and the relationship between specific speed ... (( The following details omitted) Second, large-scale vertical ramp pump R & D, production status 1. Large vertical ramp pump of the typical structure 2. Vertical oblique flow pump axial thrust 3. Large vertical ramp pump Bearing issues 4. Sea water pump additional protection against seawater corrosion Third, the development trend and problems 1. R & D of hydraulic models 2. Inlet flow research 3. Extra large vertical ramp pump development 4. Variable frequency Speed ​​regulation flow method of the promotion of 5. Design methods and related disciplines for further research