[knowledge] high-altitude essential tools new design five-point seat belt

Spider-man seat belts are also called all-round seat belts or five-point seat belts. The national standard GB6095-2009 stipulates that belts must be made of high-strength polyester webbing or higher-strength fiber materials. The surface of the metal fittings should be smooth, free of pits and cracks, and no corrosion should be experienced after 48 hours of salt spray testing. Accessories are forged and stamped, without welding.

Five-point seat belt advantages:

Surrounding pole type operating belt: Applicable to outside line electrician, telecommunication worker operation, wire maintenance and other similar types of work

Fall prevention seat belts: for high-altitude operations such as electrical installation and maintenance,

Five-point seat belts: Can be adapted to various types of operations, including (enclosure operations, fall suspension, vertical operations, etc.)

Seat belt advantages: high strength, wear resistance, durability, mold resistance, acid and alkali resistance, simple and lightweight, safe and applicable.

Five-point seat belt appearance:

1. The belt must be a whole

2. The waistband of the belt should be covered with soft material

3. The welder's hanging rope must be fully sleeved, the other hanging ropes must be partially covered, the hanging rope must be sleeved, and the rope must not be loose.

4. The metal hook must have a safety device, can freely open and close more than 10000 times

5. The surface of metal fittings should be smooth, free of pits and cracks, and need to be treated with rust prevention; the whole piece is not welded.

Five-point seat belt product advantages:

1, light weight, metal spreader 20% of the weight, easy to use.

2, do not hurt the surface of the object being hung.

3, lifting is stable and safe.

4, strong and colorful.

5. Improve labor efficiency and save costs.

6, corrosion resistance, good wear resistance.

7. Wide range of uses: It is used in port industry, chemical industry, iron and steel, machinery, petroleum, electric power, railway, mining, metallurgy, shipbuilding, automobile, aerospace, military, installation and other industries.

*Precautions:

1. The lifting object cannot exceed the rated load.

2, do not twist the sling, knot.

3, slings can not be repaired.

4. Do not touch sharp objects directly.

5. Check before each use.

6. Do not drag on the surface of objects hit by friction or on the ground.

7. Do not drag on the sling when it is on the sling.

8. The storage environment should be kept away from chemicals, ultraviolet rays and heat sources.

9, consider whether to use the appropriate sling tools before each use.

10, to maintain a smooth lifting.