LED display installation is a meticulous and rigorous work, which is very important for the display system to display properly. The following small series will explain the installation steps of the LED display through the graphic. 1. First splicing the cut profiles, that is, assembling the outer frame of the display. The general profiles on the market are nothing but square or round, but the assembly method is the same. 2, the outer frame is assembled, the unit board is placed in the frame (note the front and back of the frame, the grooved side is the front), at this time the position of the installation of the back strip is quite accurate, avoiding the wrong one and changing all Trouble. 3. After the back strip is fixed, remove the frame and install the magnet. 4. Fix the unit board. 5. Connect the cable and the upper and lower power cables. 6, fixed the power and control card. 7, power supply and unit board wiring, pay attention to the positive and negative, it is recommended to use SVV2 ​​* 1.0 soft core wire, which is 1 square double strand soft core wire. 8, control card and unit board cable connection (especially important), please carefully read before connecting, the screen is not fixed to the wall, this is the most critical step, you can first check the screen installation through the test button.
Led grow bars 320W, with 6head grow bar, samsung chip and meanwell driver, Epistar chip also available, 4/6/8/10/12 bars can be customized, each bar include 3500k white and 660nm red, the best spectrum for indoor plant growth, 3500 white can replace the sunshine lighting, give plants more energy.
Greenhouse Growing Light,Greenhouse Grow Lights,Greenhouse Plant Lights,Plant Grow Lights
Low Light Herbs,Cheap Grow Light For Herbs ,Indoor Herb Garden Light,Indoor Herbs Low Light Shenzhen Wenyi Lighting Technology Co., Ltd , https://www.wygrows.com
LED display installation steps
[ Huaqiang Security Network News ]