It is a painful thing to decorate the house bathroom waterproofing! It is not only for the comfort of our living, but also for the neighborhood and the safety of the floor. The following decoration home decoration network Xiaobian will introduce the relevant knowledge of bathroom waterproofing practice for everyone!
Brass fasteners are used for their physical and aesthetic properties. Brass is utilized due to its high thermal conductivity and corrosion resistant properties, it is suitable for use in hot and cold environments, and resistant to water corrosion, making it a staple of industries such as heating and plumbing. Brass fasteners are largely non-magnetic (like any fastener, slight magnetic properties can develop during the manufacturing process) and resistant to tarnishing.
Metal Pins,Stainless Steel Pins,Flange Alignment Pin,Safety Coupler Pin Taizhou Hongchuang Hardware Co., Ltd. , https://www.jstaizhouhongchuang.com
1. The floor of the bathroom is paved with cement mortar, and the direction is the direction of the floor drain. The slope of the bathroom door is relatively small, and the slope of the floor drain will be relatively large.
2. Pipeline through the root of the floor and the location near the floor drain to enhance waterproofing. The tube root building is sealed with a sealing paste. After the smoothing of the corner of the cement, when the waterproof coating is applied, the reinforcing layer of the glass cloth is 1 to 2 layers.
3. The wall of the bathroom should be treated flat, no small particles, and no floating ash hanging. Wipe the small corners or slopes at the junction of the wall and the ground. When the waterproof coating is applied, the reinforcing layer of the glass cloth is 1 to 2 layers.
4. For the total thickness of the polyurethane waterproof coating film, the requirement is ≥15mm, first brushed at the bathroom tube root and the corner reinforcement layer, and then brushed and scraped a large area after 4 hours under normal temperature conditions. There should be no slipping and bubbling. After 24 hours of curing, apply the next layer.
5. After painting the facade of the bathroom, apply the plane, and the direction of the next pass is perpendicular to the previous one. When the last coating is semi-cured, the coarse sand is thrown, which makes it easier to combine with the cement mortar.
7. Perform a 36-hour water shut-off test in accordance with the relevant requirements. It is recommended to discuss the downstairs neighbors corresponding to the bathroom.
Regarding the waterproofing practice of the bathroom , the decoration house decoration network Xiaobian will introduce so much for everyone, the owners can communicate with the decoration master according to their own bathroom situation. For more related knowledge, please pay attention to the decoration encyclopedia section!
Brass fasteners are suited for some marine environments, including brackish water and slow current sea water; brass in this environment develops a protective green coating. Brass fasteners are also commonly used with wood applications, as the golden coloring blends well with the tan wood. Brass is a softer metal and must be used with care, always drilling pilot holes and using driver bits that fit the head of the screw precisely to prevent stripping. Brass Bolts also require a pilot hole be driven before installtion.
Bathroom waterproofing: the steps are clear and handle