The regular inspection of the belt conveyor is a planned preventive inspection of the machinery industry. In addition to manual observation, the inspection method must also have certain inspection tools and instruments, and the inspections should be carried out according to the regular inspection card. The tape conveyor should also be checked for accuracy to determine the actual accuracy of the equipment. “Cleaning†in the daily maintenance of the belt conveyor is the basic work of maintenance and must be institutionalized and standardized. Next, please ask the engineers of Xinxiang Sanjiang Vibration to explain the daily maintenance of the belt conveyor for the users.
First, the maintenance and maintenance of the belt conveyor through the general methods of wiping, cleaning, lubrication, adjustment and other aspects of the belt conveyor to maintain and protect the mechanical properties and technical conditions of the equipment, called equipment maintenance. There are four main requirements for equipment maintenance and repair:
1. Clean, the belt conveyor should be kept clean and tidy inside and outside. The sliding surfaces, screw rods, racks, gear boxes, oil holes, etc. are free of oil. The parts are not leaking or leaking, and the chips around the equipment are mixed. Things, dirt, etc. should be cleaned;
2, neat, tools, accessories, workpieces (products) should be placed neatly, pipelines, lines must be organized;
3, good lubrication, oiling or oil change on time, continuous oil, no dry friction phenomenon, normal oil pressure, bright oil mark, smooth oil passage, oil quality meets Tianjin machinery requirements, oil gun, oil cup, linoleum cleaning;
4, safety, comply with safe operating procedures, do not overload the use of belt conveyors, equipment safety protection devices are complete and reliable, timely elimination of unsafe factors.
The maintenance of the belt conveyor generally includes routine maintenance, regular maintenance, periodic mechanical inspection and precision inspection. Equipment lubrication and cooling system maintenance are also an important part of equipment maintenance.
Second, the maintenance of the belt conveyor should be carried out in accordance with the maintenance machinery regulations.
The maintenance procedure of the belt conveyor is the requirements and regulations for the daily maintenance of the equipment. The equipment maintenance procedures are adhered to, which can extend the service life of the equipment and ensure a safe and comfortable working environment. Its main content should include:
1. The equipment should be neat, clean, sturdy, lubricated, and the construction machinery should be recruited for anti-corrosion, safety, etc., operation methods, working tools and materials, land standards and precautions;
2. Daily sun machine inspection and maintenance and regular inspection of site parts, methods and standards;
3. Inspection and assessment of the extent to which the operator maintains the equipment and methods of glass machinery, etc.
3. Check before shutdown 1. Check whether there are any obstacles on the belt conveyor that will damage the conveyor belt before shutting down. If there is, remove the obstacles;
2. Observe whether the power supply is normal before shutting down, and if necessary, make measurement and adjustment to ensure the normal voltage required by the equipment;
3. If the inspection equipment is normal, it can be turned off;
(1) Use inverter speed regulation, please read the operating instructions of the inverter.
(2) Speed ​​ratio control is adopted, and the operation sequence is as follows:
Shutdown sequence: Close the main power switch in the control box (the power indicator lights up) → start the start button → turn the speed ratio control switch to the “ON†position → slowly rotate the speed control knob to the desired speed range. Let it run at a constant speed; do not use it beyond the 1500 rpm range. Shutdown sequence: The knob in the speed ratio control is slowly rotated back to the “0†position → After the plane conveyor stops, turn the speed ratio control switch to the “OFF†position → turn off the start switch and the main power switch.
Xinxiang Sanjiang Vibration is a professional screening equipment manufacturer. It has been committed to vibrating screen technology research and equipment innovation for many years, and strives to build more advanced equipment to serve more customers! My company's main products are: vibrating screen, vibration motor, hoist, conveyor and other products.
Service hotline/13937334741/13353661770 
From sending critical data to enhancing products with beauty, fiber optics are all around us.
We use fiber optic cable light in many diverse applications. From delivering phototherapeutic light to treat babies with Jaundice, or allowing spinal surgeons to visualize deep in cavities, to backlighting components found in automobiles, keyboards, and even shoes.
DSPOF supplies high quality single strand unsheathed PMMA fiber optic tube. If you wanan customized any size fibers,please contact with us.
Fiber Optic Tube,Fibre Optic Cable Light,Fiber Optic Cable Light,Fibre Optic Cable For Lighting
Jiangxi Daishing POF Co.,Ltd , https://www.jxopticfibrelight.com